Polypipe Soil Pipe Clip - 110mm - Grey

This clip is specifically designed to support 110mm diameter soil and vent pipes.

While it is designed for soil and vent pipes, it may be suitable for certain larger diameter waste pipes depending on application and local regulations. However, it is optimized for soil and vent systems.

The clip is made from a durable plastic, designed for long-term use in plumbing installations.

No, the Polypipe soil pipe clip typically does not include mounting screws or fixings. These need to be selected based on the type of surface you are attaching it to.

While it might physically fit, it is designed for optimal compatibility with Polypipe's PolySoil® system. For guaranteed performance and compliance, it's recommended to use it with Polypipe pipes and fittings.

The number of clips required depends on the pipe run length, orientation (vertical/horizontal), and local building regulations. Consult Polypipe installation guides or a professional plumber for specific recommendations.

The grey colour is designed to match other components within the Polypipe PolySoil® range, providing a coordinated and aesthetically pleasing finish to the installation.

Ensure you are using the correct size clip (110mm) for your pipe. Verify that the pipe is not deformed. If the pipe is slightly out of round, gentle manipulation might help, or consider using a slightly larger clip if available and suitable for the system.

Use appropriate wall plugs or anchors for the wall material (e.g., masonry, plasterboard). Ensure screws are the correct size and type for the clip's mounting holes and the chosen anchor.

Ensure the clip is tightened sufficiently around the pipe without deforming it. Check if additional clips are needed along the pipe run for better support. Ensure the pipe is adequately supported by the overall system.