Best current price£8.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£8.99Visit shop B&Q - Water Resistant Fix & Grout Tub 470G
Visit shop1 offer from £8.99
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professional tilers seeking a reliable, ready-mixed adhesive and grout solution. The key benefit is its waterproof formulation and ease of use for quick tile installations. A potential caveat is that it's a ready-mixed product, offering less working time than pre-mix powders. This product, Maestro Craft Fix and Grout, comes in a convenient 470g tub, providing a white, waterproof solution ideal for bathrooms and kitchens.
| Colour | White |
|---|---|
| Model Part Number | 10060 |
| Brand | Maestro craft |
Maestro Craft Fix and Grout 470g is primarily designed for wall tiles and is not recommended for floor applications due to wear and tear.
No, this is a ready-mixed product and does not require any mixing. It is ready to use straight from the tub.
Drying times can vary based on temperature, humidity, and application thickness. Typically, it is workable for approximately 20-30 minutes and will set within a few hours. Full cure can take 24-48 hours.
Yes, the product is formulated to be waterproof once fully cured, making it ideal for use in bathrooms and kitchens.
It is generally not recommended to tile over existing tiles with this product unless the existing surface is specifically prepared and deemed suitable by a tiling professional. It's best used on a stable substrate.
Unopened, it should be stored in a cool, dry place and used within the manufacturer's recommended timeframe, usually around 6-12 months. Once opened, it's best to use it as soon as possible.
It can be applied to most common drywall, plaster, and cementitious surfaces after ensuring they are clean, dry, and sound.
Ensure the product has not been exposed to extreme temperatures. For minor thickening, a small amount of water may be added sparingly, but avoid over-diluting. Stir thoroughly before application.
Check that the surface was clean and dry before application. Ensure a sufficient, even layer of adhesive was applied. For very porous surfaces, pre-priming might be necessary. Ensure the product is within its shelf life.
Ensure grout lines were fully packed with the product. Allow adequate drying time before exposing to moisture. If cracking occurs, it may indicate insufficient depth or rapid drying; reapply and allow proper curing.
Work in smaller sections. Mist the surface lightly with water if working in very hot or dry conditions, but be careful not to saturate. Ensure you have all tiles ready for immediate placement.
Setup:
Compatibility:
Care:
