Paul Moneypenny Leopard Print Wallpaper - Cream - Animal

The main benefit is its luxurious, tactile leopard print design with a subtle metallic sheen, created through a collaboration with Paul Moneypenny, offering a unique and glamorous statement for your walls.

While the vinyl finish is scrubbable, it is not specifically designed for high-moisture areas like bathrooms or kitchens. Adequate ventilation is recommended to prevent long-term moisture issues.

You can clean it with a damp cloth and mild soapy water. Avoid abrasive cleaners or excessive scrubbing to protect the embossed texture and metallic finish.

'Paste the wall' means you apply the wallpaper adhesive directly to the wall surface, rather than to the back of the wallpaper itself. This method is generally quicker and less messy.

Specific pattern repeat details should be checked on the product packaging or manufacturer's website, as it is crucial for accurate installation and achieving a seamless look.

Yes, this wallpaper is designed for effortless removal. Typically, it can be stripped from the wall in dry strips once you're ready for a change.

This wallpaper is best applied to smooth, clean, and dry interior walls. The embossed texture shows best on well-prepared, flat surfaces.

Ensure the wall is properly prepared (clean, dry, and possibly primed). Use the correct type and amount of wallpaper paste for vinyl, non-woven backed papers. Check paste application is even and covers the entire wall area.

Ensure panels are butted tightly together. Re-paste the edges if necessary. Use a seam roller very gently if required, being careful not to damage the embossed texture.

Smooth out air bubbles immediately after hanging using a wallpaper brush or roller, working from the center outwards. If bubbles appear later, you may need to carefully lift the edge and re-adhere with paste.

Double-check that the first panel was hung perfectly level. Ensure you are following the pattern repeat instructions and aligning the design on subsequent panels accurately before smoothing.

Ensure adequate water and/or a suitable stripper solution is used to penetrate the vinyl. Allow sufficient soaking time before attempting to peel. Score the surface gently if needed to help the solution penetrate.