Leyland Trade Specialist White Mdf Primer, 750Ml - White

The primer provides an average coverage of 13 m² per litre, but this can vary based on the surface and application method.

While primarily designed for MDF, it may be used on other wooden surfaces after proper preparation.

Allow the primer to dry for 1-2 hours before applying the topcoat.

You can use a brush or a roller to apply the primer.

Yes, this primer is suitable for both interior and exterior use.

Clean your brushes and rollers immediately after use with the appropriate solvent for your paint type.

If the primer feels thick, ensure that it is mixed thoroughly before application. If needed, a small amount of the appropriate thinner can be used as per the manufacturer's guidelines, but this is usually unnecessary.

Ensure the surface is clean and properly prepared. Lightly sand the surface before application. Apply a second coat if needed.

Apply the primer evenly, avoiding excessive build-up. Use a high-quality brush or roller. Apply a second coat if needed, and sand lightly between coats.

Ensure adequate ventilation. Check the temperature and humidity levels in the room. High humidity can slow drying times.