Lift Up Flap Top Hinge - Supertool - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for DIY enthusiasts and furniture makers looking to add functional lift-up mechanisms to furniture. The Supertool Lift Up Flap Top Hinges offer a durable and smooth opening action for cabinets, beds, and sofas, with a key benefit of enhanced accessibility and modern design. A potential caveat is the specific 80° opening angle, which may not suit all project requirements.
All features
| Colour | Silver |
|---|---|
| Model Part Number | HA3083 |
| Brand | Supertool |
Extended Product Information
FAQs
What material are these hinges made from?
These hinges are made from durable stainless steel, known for its corrosion resistance and longevity.
What is the maximum opening angle for these hinges?
The hinges are designed to open up to an 80° angle.
Does the pack include hinges for both sides?
Yes, each pack includes one left and one right spring hinge.
Can these hinges be used on very heavy cabinet doors?
While the spring mechanism provides strength, it is best suited for moderate weight applications. For very heavy doors, additional support may be required.
How do I clean and maintain the hinges?
Wipe with a soft, dry cloth for regular maintenance. Use a damp cloth with mild soap for cleaning, and always dry thoroughly. Avoid abrasive cleaners.
Are installation screws included with the hinges?
Typically, installation screws are not included, as the type and length required can vary depending on the material and thickness of the furniture.
What kind of applications are these hinges best suited for?
They are ideal for lift-up cabinet doors, folding sofas, storage beds, and other furniture that requires an upward-opening mechanism.
Troubleshooting
Hinge is stiff or difficult to open/close.
Ensure hinges are correctly aligned and mounted. Check for any obstructions. If new, the spring mechanism may need a few cycles to fully break in. Avoid forcing the hinge.
Hinge does not hold the door/lid open at 80°.
Verify that the hinge is installed in the correct orientation for lift-up action. Ensure the spring mechanism is functioning properly. Check if the weight of the door/lid exceeds the hinge's rated capacity. Consider using additional support if necessary.
Uneven opening or closing action.
Re-check the alignment and mounting screws of both hinges. Ensure they are perfectly parallel and flush with the surfaces. Minor adjustments to screw tightness might be needed.
Corrosion or rust spots appearing on the surface.
Wipe the affected area with a soft cloth and a mild cleaner. Ensure the hinges are kept dry. If corrosion is significant, the hinge may need replacement.
Pros and Cons
Pros
- Corrosion-resistant and durable stainless steel material.
- Reliable and strong spring mechanism for smooth operation.
- Aesthetically pleasing nickel-plated finish.
- Includes both left and right hinges for ease of use.
- Suitable for a variety of furniture modification projects.
Cons
- Fixed 80° opening angle may limit some design possibilities.
- Requires precise installation for optimal performance.
- May not be suitable for extremely heavy doors or lids without additional support.
Setup, Compatibility & Care
Setup:
- Determine Placement: Measure and mark the exact positions for the hinges on both the furniture frame and the door/lid. Ensure they are aligned to allow for proper opening and closing.
- Attach Hinges: Securely attach each hinge to the marked surfaces using appropriate screws (screws not typically included). Ensure the hinges are parallel and level.
- Test Operation: Carefully test the opening and closing mechanism. The spring action should be smooth and provide adequate support.
Compatibility:
- These hinges are designed for wood or composite materials commonly used in furniture construction.
- They are ideal for applications where a lift-up or flap-top opening is desired.
- The 80° opening angle is a fixed feature, so ensure this range is suitable for your project's clearance and accessibility needs.
Care:
- To maintain the finish and functionality, periodically wipe the hinges with a soft, dry cloth.
- For stubborn marks or light corrosion, use a damp cloth with a mild soap solution. Dry thoroughly afterward.
- Avoid using abrasive cleaners or harsh chemicals, as they can damage the nickel plating and stainless steel.