Best current price£156.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£156.95Visit shop B&Q - Spruce Tongue And Groove Cladding (T) 17mm (W) 185mm (L) 2.5MPack Of 4
Visit shop1 offer from £156.95
View price history by clicking the chart icon.
Designed for DIY enthusiasts and homeowners looking to elevate their interior aesthetics, the Snowdon Timber Spruce Tongue and Groove Cladding offers an accessible way to introduce natural wood textures to any room. This product provides a durable, professional-grade finish for feature walls and hallways with minimal carpentry experience required, though users should note that as a natural timber product, it requires acclimatization to the room's environment prior to installation to prevent warping.
| Brand | Snowdon Timber |
|---|
Yes, spruce is an excellent wood for painting. Ensure you prime the surface first to seal the knots and provide a consistent base for your topcoat.
While you can fix it directly to a flat, dry wall, using timber battens is recommended to allow for air circulation and to compensate for any slight unevenness in the wall.
Each pack contains four strips, each measuring 2.5 meters in length.
It is intended for general interior use. If used in a bathroom, you must apply a high-quality marine-grade varnish or waterproof sealant to prevent moisture damage.
You will need a saw for cutting to length, a spirit level for alignment, a hammer, and appropriate fixings like wood nails or a high-strength wood adhesive.
Calculate the total square meterage of your wall (height x width) and divide by the coverage of one pack (which is approx 1.85 square meters per pack) then add 10% for wastage.
Check for debris in the groove or slight damage to the tongue caused during transport; lightly sand any rough spots or use a small file to clear the channel.
This is often due to skipping the acclimatization process. If gaps appear, you may need to fill them with a color-matched wood filler or consider re-securing the boards if they have shifted.
Lightly sand the surface with fine-grit sandpaper (180-240 grit) before applying a sealer or lacquer to create a smooth, paintable or stainable surface.
Before beginning, move the packs into the room where they will be installed and let them rest for at least 48 hours to allow the timber to adjust to the room's humidity and temperature. This is critical to prevent future warping. For installation, you will need basic tools including a saw, a spirit level, a hammer, and appropriate adhesive or pins/nails depending on your mounting method. While the spruce comes in a natural state, it is highly recommended to apply a protective finish—such as a wood oil, varnish, or wax—after installation. This not only preserves the wood color but also protects the surface from dirt, scuffs, and daily wear. Dust the cladding regularly with a soft cloth to maintain its appearance.
