Best current price£190.49from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£190.49Visit shop Lindy Black 32622 Power Distribution Unit (Pdu) 4 Ac Outlet(S) 1U
Visit shop
www.lindy.co.uk£455.84Visit shop 4 Port IPower Switch
Visit shop4 offers from £190.49 - £455.84
View price history by clicking the chart icon.
The Lindy IPower Switch (4 Port) is an intelligent network-connected power management solution ideal for IT, AV, and office environments. It provides remote control and monitoring of up to four connected devices, allowing users to power cycle, reboot, or schedule operations via a web interface or API commands. While offering robust control and monitoring, initial network configuration might require some technical understanding.
| Series | IPower Switch |
|---|---|
| Model Part Number | 32622 |
| Brand | Lindy |
The unit supports a total power of 2500W. It can support up to 2640W maximum (10A@264V) by setting a voltage threshold.
You can control and monitor up to four devices, each connected to one of the four IEC C13 output ports.
Yes, each outlet has a physical button for manual control, although this feature needs to be enabled in the web interface.
It supports open APIs for Telnet, Modbus TCP, SSH, SNMP, and MQTT protocols.
Yes, the Lindy IPower Switch comes with a 3-year warranty.
Delay settings for each outlet can be configured through the intuitive web interface under the outlet management or sequencing settings.
Yes, the web interface provides real-time monitoring of voltage, current, and power consumption for each individual outlet port.
Verify network cable connection. Ensure the device has a valid IP address and is on the same network segment or routed correctly. Check firewall settings.
Check the power cable connections to both the IPower Switch and the device. Verify the selected outlet is enabled and configured correctly in the web interface. Test the outlet manually using the physical button if enabled.
Ensure SMTP server details, sender address, and recipient addresses are correctly configured in the alert settings. Verify network connectivity to the SMTP server.
Disconnect devices and check their power consumption. Ensure the total load does not exceed the 2500W (or 2640W max) limit. Replace or remove high-consumption devices if necessary.
Setup: Connect the IPower Switch to your network via an Ethernet cable. Power on the unit. Access the web interface using the default IP address (refer to the manual) and configure network settings, including DHCP or a static IP address. Set up user accounts and passwords for security. Configure individual outlet names, delay timers, and alert thresholds as needed.
Compatibility: The unit is compatible with standard IEC C13 power cords for connected devices. It supports a voltage range of 110V to 250V. Network compatibility requires standard Ethernet infrastructure.
Care: Keep the unit in a well-ventilated area to prevent overheating. Clean the exterior with a dry or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure the power outlets and connected device plugs are clean and free of debris.
