Best current price£117.50from eBay
Shopping.co.uk recommended and popular offers
eBay£117.50Visit shop UPOL Raptor BLACK 5L Tough Urethene Coating Truck Bed Liner Underbody U POL
Visit shop2 offers from £117.50 - £128.26
View price history by clicking the chart icon.
The U-Pol Raptor Tough Urethane Coating is a professional-grade 2K protective solution designed for DIY enthusiasts and commercial users who need to shield truck beds, trailers, and underbodies from harsh environmental wear. It offers exceptional resistance to impacts, chemical corrosion, and extreme weather, making it the gold standard for heavy-duty surface protection; however, it requires precise mixing and professional spray equipment for a consistent, factory-quality finish.
| Colour | Black |
|---|---|
| Model Part Number | RLB/5 |
| Brand | U-Pol |
| Container Volume | 5000ml |
For most properly sanded surfaces, a primer is not required, though it is highly recommended for bare metal to maximize corrosion resistance.
While it can be applied with a brush or roller, a spray gun is required to achieve the professional, uniform textured finish for which the product is known.
The coating is dry to the touch in about 24 hours, but it reaches full chemical hardness after approximately 5 to 7 days.
Yes, once fully cured, the coating is inert and safe; however, ensure adequate ventilation during the spraying and drying process due to VOC emissions.
Yes, it can be painted over once cured, provided the surface is cleaned and lightly scuffed to promote adhesion.
Incorrect ratios will result in a coating that may never harden properly, remains sticky, or lacks the necessary chemical resistance.
Check the mixing ratio; ensure the hardener was mixed thoroughly in the 3:1 proportion and ambient temperature is above 15 degrees Celsius.
Maintain constant air pressure at the spray gun and keep a consistent distance from the surface during application.
This is usually caused by inadequate surface preparation; ensure the substrate was properly scuffed and completely free of grease or wax.
Preparation is the most critical phase for U-Pol Raptor. Surfaces must be sanded to remove gloss and wiped clean with a solvent-based degreaser to ensure maximum mechanical bond. The product must be mixed according to the specified 3:1 ratio (coating to hardener) before being loaded into the spray canister. Compatibility is high across most prepared metals, plastics, and wood, though a primer may be necessary for bare aluminum or specialized composites. Once cured, care is minimal; the surface can be cleaned with standard mild detergents and low-pressure water rinsing.
