Stormguard Draught Excluder - White
Best current price£10.00from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£10.00Visit shop B&Q - White Plastic Not Self-Adhesive Draught Excluder(L)0.84M
Visit shopB&Q£10.00Visit shop One Offer
1 offer from £10.00
View price history by clicking the chart icon.
B&QB&Q - White Plastic Not Self-Adhesive Draught Excluder(L)0.84M
Free delivery in 1–3 days
£10.00
Visit shop
Product Information
Full details
This Stormguard Draught Excluder is designed for homeowners looking to improve energy efficiency by sealing gaps at the bottom of doors. Its key benefit is preventing draughts, reducing heat loss, and potentially lowering energy bills. A minor consideration is its fixed nature, meaning it's best suited for specific gap sizes up to 24mm. This product features a brush seal for effective draught exclusion, a hinged front to conceal fixings for a clean look, and pre-drilled holes for easy installation. It's also cuttable to size.
All features
| Model Part Number | Skip18B |
|---|---|
| Brand | STORMGUARD |
Extended Product Information
FAQs
What is the maximum gap size this draught excluder can seal?
This draught excluder is designed to seal gaps up to 24mm at the bottom of a door.
Can I cut this draught excluder to fit my door?
Yes, the draught excluder can be cut down to size using a suitable cutting tool, such as a hacksaw.
Does it come with screws?
Yes, fixings are included with the draught excluder for installation.
Is this suitable for external doors?
Yes, this draught excluder is suitable for both internal and external doors.
How do I clean the draught excluder?
You can clean the plastic casing with a damp cloth. Avoid abrasive cleaners.
Will the fixings be visible after installation?
No, the product features a hinged front cover that conceals the fixings for a smooth, clean finish.
What tools are needed for installation?
Basic tools such as a measuring tape, pencil, hacksaw (if cutting is needed), and a screwdriver are typically required.
Troubleshooting
Draught excluder does not seal the gap completely.
Check if the gap exceeds 24mm. If so, this product may not be suitable. Ensure the excluder is correctly positioned and cut to the exact width of the door. Verify the brush is making firm contact with the floor or threshold.
Fixings are difficult to secure.
Ensure you are screwing into a solid part of the door. If drilling pilot holes, make sure they are the correct size for the screws. If the door is very thin or hollow, consider using appropriate anchors if needed.
Hinged cover does not close properly.
Check that the screws are not protruding too far. Ensure the excluder is mounted flush against the door and that no debris is obstructing the cover.
Brush seal appears worn or damaged.
For normal wear and tear, consider replacing the excluder. If the damage is recent or due to a specific incident, assess if the brush can be repositioned or if a replacement part is available.
Pros and Cons
Pros
- Significantly reduces draughts, improving home comfort.
- Concealed fixings offer a neat and tidy aesthetic.
- Can be customized to fit specific door widths.
- Easy to install with pre-drilled holes and included fixings.
- Suitable for a range of door types.
Cons
- Best suited for gaps up to 24mm; larger gaps may not be fully sealed.
- Requires basic tools for cutting and screwing.
- The brush seal may wear down over extended periods of heavy use.
Setup, Compatibility & Care
Setup:
- Measure the gap at the bottom of your door. Ensure it is no larger than 24mm.
- If necessary, cut the draught excluder to the required width using a hacksaw or appropriate cutting tool. Ensure the cut is straight for a good seal.
- Position the excluder against the bottom of the door, ensuring the brush seal makes contact with the floor or threshold.
- Use the pre-drilled holes as guides to mark fixing points on the door. If holes do not align with your door, you may need to drill new pilot holes.
- Screw the draught excluder securely to the door using the provided fixings.
- Close the hinged front cover to conceal the fixings.
Compatibility:
- Suitable for most standard internal and external doors.
- Designed for gaps up to 24mm.
- Requires a flat surface on the bottom of the door for attachment.
Care:
- Wipe the plastic casing with a damp cloth as needed.
- Periodically check the brush for wear and tear. If significantly worn, replacement may be necessary.
- Avoid using abrasive cleaners.