XL Joinery Internal White Primed Shaker 4 Panel Fire Door - 2040 X 926 X 44mm - White

No, this door comes white primed and requires painting before installation to achieve the desired finish and proper sealing.

The specific model referenced is 2040mm high x 926mm wide x 44mm thick.

You should use a high-quality interior paint. Ensure you apply a suitable primer first and then at least two topcoats. All surfaces, including edges, must be fully coated.

Yes, if you have basic carpentry skills. Ensure you follow proper installation procedures for fire doors, including using appropriate hardware and not excessively planing the door.

This is a fire-rated door, typically offering 30 minutes of fire protection (FD30). Always confirm the specific rating with your supplier and ensure installation meets building codes.

Yes, matching panelled and glazed doors are available from XL Joinery to create a consistent look throughout your home.

Fire doors have specific limitations on how much can be trimmed to maintain their fire rating. Consult the manufacturer's guidelines or a professional installer for precise information, but generally, only a small amount can be taken from the sides and top.

Check if the door has been painted too thickly on the edges, or if hinges need adjustment. Minor adjustments to hinges or light sanding on the sticking edge may resolve the issue. Ensure the frame is not warped.

Ensure the surface was properly prepared with primer. Apply thin, even coats of paint, allowing adequate drying time between coats. Lightly sand between coats if necessary.

Consult building regulations for specific fire-rating requirements (e.g., FD30). Ensure all hardware and installation methods comply with these regulations. Do not modify the door beyond recommended planing allowances.