Setup, Compatibility & Care
Setup Instructions
- Measure the total length of your staircase landing and mark the wall stud locations.
- Cut the 1.2 metre sections if necessary to match your specific layout using a fine-tooth hacksaw.
- Install the wall brackets at consistent intervals, ensuring they are perfectly level.
- Connect the poles using the adjustable elbows, tightening the set screws once the desired angle is achieved.
- Cap off ends and verify that all brackets are tightened against the wall to prevent movement.
Compatibility
This kit is designed specifically for the 40mm Luddington range. Do not attempt to use brackets or elbows from other brands, as internal threading and diameter tolerances may vary.
Care and Maintenance
- Wipe down periodically with a soft, damp cloth to maintain the textured finish.
- Avoid using abrasive scouring pads or harsh chemical cleaners, as these can strip the grey coating.
- Check and tighten wall bracket screws annually to account for natural home settling.