Best current price£20.06from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£20.06Visit shop Eaton Y7-267976 Impulse Switch 20A DIN Rail 1pc 24VAC/50Hz 2S Relay
Visit shop8 offers from £20.06 - £181.84
View price history by clicking the chart icon.
The Eaton Installation Relay Z-TN24/SS is designed for electricians and control system integrators needing reliable switching in residential and industrial applications. Its key benefit is safeguarding electrical circuits with built-in surge protection and handling up to 20A. A potential caveat is its specific 24VAC/50Hz control voltage requirement, necessitating careful power supply matching. This impulse changeover switch offers two normally open contacts and is suitable for DIN rail mounting, simplifying installation in control panels.
| Series | Z-TN24/SS |
|---|---|
| Model Part Number | Z-TN24/SS |
| Brand | Eaton |
The Z-TN24/SS is an impulse changeover switch designed for control and load circuits, featuring surge protection and DIN rail mounting.
The required control voltage is 24VAC/50Hz.
The contacts are rated for a maximum of 20 Amperes.
Yes, the Z-TN24/SS features built-in surge protection to safeguard connected circuits.
It is designed for standard 35mm DIN rail mounting.
It has two normally open (NO) contacts.
While it can handle significant current, it's an impulse relay primarily for switching operations, not necessarily continuous duty depending on the application context and load type.
Verify that the control voltage is exactly 24VAC/50Hz and is correctly connected to the input terminals. Check for loose connections.
Ensure the load is wired correctly through the normally open (NO) contacts. Confirm the load's power requirements are within the 20A rating. Check for a complete control circuit.
Immediately disconnect power. Check if the load current exceeds the 20A rating. Ensure adequate ventilation around the relay. If the issue persists, replace the unit.
Setup: The Z-TN24/SS is designed for DIN rail mounting (35mm standard). Ensure the relay is securely clipped onto the rail in a suitable electrical enclosure. Wire the control circuit to the designated input terminals, ensuring the 24VAC/50Hz power supply is correctly connected. Wire the load circuit through the normally open contacts according to your schematic.
Compatibility: This relay is compatible with standard 24VAC/50Hz control power sources. It is designed to switch AC loads up to 20A. Always verify that the controlled load's current and voltage requirements do not exceed the relay's specifications.
Care: Regularly inspect the relay for any signs of physical damage or overheating. Keep the surrounding area clean and free from dust and debris that could impede ventilation or cause short circuits. No regular maintenance is typically required beyond visual inspection.
