Best current price£8.20from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£8.20Visit shop Plastikote White 025649 Twist & Spray Appliance Enamel Gloss 400Ml
Visit shop9 offers from £8.20 - £24.79
View price history by clicking the chart icon.
This Plasti-Kote Appliance Enamel Spray in Gloss White is designed for DIY enthusiasts and homeowners looking to refresh the appearance of their kitchen appliances. Its key benefit is providing a quick-drying, durable, and easy-to-apply finish that restores a like-new look to metal surfaces. A potential caveat is its suitability primarily for metal surfaces in the kitchen, requiring proper surface preparation for optimal adhesion and longevity.
| Colour | White |
|---|---|
| Model Part Number | PKT619 |
| Brand | PlastiKote |
This appliance enamel is designed for most metal surfaces in the kitchen, such as refrigerators, dishwashers, and washing machine exteriors.
The drying time varies depending on temperature and humidity, but it is a quick-drying formula. Always refer to the specific drying times indicated on the product label for best results.
For best adhesion and a long-lasting finish, it is recommended to prepare the surface by cleaning it thoroughly and lightly sanding any glossy areas. A dedicated metal primer can also be used for optimal results on bare metal.
No, this appliance enamel is not formulated for high-heat applications. It is intended for the exterior surfaces of kitchen appliances that do not reach extreme temperatures.
Clean the surface with a soft, damp cloth. Avoid using abrasive cleaners or scouring pads to maintain the integrity of the finish.
This product is specifically designed for metal surfaces. It is not recommended for use on plastic, as adhesion and durability may be compromised.
The Plasti-Kote Appliance Enamel Spray provides a durable gloss white finish that is resistant to scratches, stains, and moisture, with a non-yellowing formula.
Ensure the can is shaken thoroughly before and during use. Check that the nozzle is clear; if blocked, remove and clean it, or try a new can.
The surface may not have been properly prepared. Ensure it was clean, dry, and lightly sanded if necessary. Check for any residual grease or moisture.
Coats may have been applied too thickly. Apply subsequent coats in thinner layers and allow proper drying time between them.
Ensure the can was shaken sufficiently to mix the pigment. Lighting conditions during application and drying can also affect perceived color.
Setup:
Compatibility:
Care:
