Best current price£21.93from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£21.93Visit shop Aet Fsc1gdim10 Satin Chrome Flat 1000W-10 Amp Single 1 Gang 2 Way 1000W Light Dimmer Switch 700461521709
Visit shop2 offers from £21.93 - £26.10
View price history by clicking the chart icon.
The Alliance Electrical FSC1GDIM40 is designed for homeowners and electricians looking for a sophisticated, low-profile lighting control solution that integrates seamlessly into modern interiors. It offers precise rotary dimming and a reliable 400W capacity for both mains and low-voltage circuits, though users should be mindful that installation requires a deeper-than-standard 35mm back box.
| Colour | Silver |
|---|---|
| Model Part Number | FSC1GDIM40 |
| Brand | Alliance Electrical |
This model is designed for 60W-400W loads. Please check the specific wattage of your LEDs to ensure the total circuit load exceeds 60W.
The maximum capacity is 400W, though this reduces to 250W when using mains halogen lamps.
Yes, this is a 1-gang 2-way switch, meaning it can control one light from two different locations.
The switch requires a minimum load of 60W to function properly.
No, the back box is not included. You must ensure a 35mm deep back box is installed in the wall.
Exceeding the wattage limit can cause the dimmer to overheat and potentially fail or trip your circuit breaker.
Ensure the total wattage of the lamps on the circuit is at least 60W. If it is below this, the dimmer will not function correctly.
Check that the total wattage does not exceed 400W (or 250W for halogen). If the load is correct, ensure there is adequate ventilation in the back box.
Verify that your back box depth is at least 35mm. If you have a shallower box, you may need to replace the back box or use a surface-mount spacer.
Installation must be performed by a qualified electrician to ensure safety and compliance with building regulations.
