Rainwater Tank Water Butt Plastic Container - Prosperplast - Grey - 210L

The Prosperplast Rainwater Tank has a capacity of 210 liters.

Yes, you will typically need a rainwater diverter and connection kit, which is often sold separately, to connect your downspout to the tank.

No, the water collected is intended for garden use only and is not suitable for drinking.

The tank usually comes with or is designed to accommodate an inlet filter. Ensure this filter is regularly cleaned to keep debris out.

The dimensions are approximately L: 56cm x W: 59.6cm x H: 113cm.

Yes, the tank is designed with an integrated tap at the base for easy water access.

It is recommended to drain the tank completely during winter to prevent damage caused by freezing water.

Ensure the rainwater diverter is correctly installed and connected to the tank's inlet. Check that the downspout is not blocked.

Check that the tap is fully closed. If the leak persists, inspect the tap seal and tighten or replace if necessary.

This can occur with stagnant water or if organic matter enters the tank. Drain and clean the tank thoroughly. Ensure the inlet filter is clear and consider using a tank lid or cover.

The tank must be placed on a perfectly level and firm surface. Ensure there is no unevenness beneath the base, especially after rain. Relocate and re-level if necessary.