Best current price£14.99from eBay
Shopping.co.uk recommended and popular offers
eBay£14.99Visit shop JCP Polyester Resin Tube Cartirdge Chemical Stud Anchor Concrete Masonry 410ml
Visit shop
B&Q£98.83Visit shop B&Q - Eta Option 7 Polyester Injection Resin Ce 410MlFjjf380PBox Of 12
Visit shop6 offers from £14.99 - £111.32
View price history by clicking the chart icon.
This JCP Fixings Eta Option 7 Polyester Injection Resin, in white and a 410ml cartridge, is designed for professionals and DIY enthusiasts needing robust anchoring and bonding solutions in concrete and masonry. Its key benefit is delivering a high-performance, durable chemical fixing. A potential caveat is the need for specific application techniques to ensure optimal performance. It offers a CE-marked, reliable solution for construction and repair.
| Colour | White |
|---|---|
| Model Part Number | Eta Option 7 |
| Brand | JCP Fixings |
It is designed for use in concrete and masonry applications.
The cartridge size is 410ml.
Yes, it is CE marked for regulatory compliance.
Ensure the substrate is clean, dry, and sound. Apply the resin correctly using the provided mixer and allow adequate curing time in suitable temperatures.
It is a polyester injection resin.
The push-fit system is designed for easy and straightforward application of the resin.
While designed for robustness, it's best used on dry substrates. Check the technical data sheet for specific performance in damp conditions or for any required pre-treatments.
Ensure the cartridge is correctly seated in the dispensing gun and the nozzle is properly attached. Check if the cartridge seal has been fully opened.
Verify that the substrate is clean, dry, and sound. Ensure the correct mixing ratio was achieved (uniform colour). Check application temperature and curing times; avoid overloading before full cure.
If a static mixer was used, ensure it was attached correctly. For partially used cartridges, follow storage instructions to prevent curing within the nozzle. If blocked, a new mixer may be required.
Check the ambient and substrate temperature against the product's recommended application range. Extreme temperatures can affect cure speed.
Setup: Ensure you have a compatible dispensing gun for the 410ml cartridge. Insert the cartridge into the gun and attach the mixing nozzle. Puncture the cartridge seal if required by the manufacturer's instructions. Dispense a small amount of resin to waste until a uniform colour is achieved from the mixer.
Compatibility: This resin is specifically designed for use in concrete and masonry. Always ensure the substrate is sound, dry, and free from dust or contaminants. It is crucial to check the product's technical data sheet for specific load capacities and suitability with different types of concrete or brickwork. Not recommended for use in damp conditions or below certain temperature thresholds without specific precautions.
Care: Store cartridges in a cool, dry place away from direct sunlight and extreme temperatures. Once opened, reseal any unused resin by leaving the static mixer attached (if possible) or by following specific manufacturer instructions. Uncured resin should be cleaned up immediately using appropriate solvents as per safety data sheets. Cured resin can be removed mechanically.
