Tamiya Blitzer Beetle - 58122
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for R/C hobbyists looking to enhance or replace their Tamiya Blitzer Beetle body shell. The key benefit is authentic visual replication for your compatible Tamiya models, offering a distinct off-road aesthetic. A caveat is that this is a body shell only, requiring assembly and painting.
All features
| Series | Blitzer Beetle |
|---|---|
| Model Part Number | 58122 |
| Brand | Tamiya |
Extended Product Information
FAQs
What Tamiya models is this Blitzer Beetle body shell compatible with?
This body shell is compatible with Tamiya models 58122 (Blitzer Beetle) and 58502 (Blitzer Beetle 2011).
Does this product include the chassis and electronics?
No, this product is a body shell only. The chassis, electronics, wheels, tires, and all assembly hardware are sold separately.
What type of paint should I use for this body shell?
It is recommended to use polycarbonate-specific spray paints designed for R/C car bodies. These paints are flexible and will adhere well to the plastic material.
Do I need to cut or trim the body shell?
Yes, typically the body shell will need to be trimmed along designated cut lines using a sharp hobby knife or R/C body scissors.
Can I use this body shell on a different Tamiya model?
While it might be possible with significant modification, this body shell is specifically designed and intended for models 58122 and 58502. Compatibility with other models is not guaranteed and may require custom work.
How do I clean the painted body shell?
Gently wipe the body shell with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the paint finish.
Troubleshooting
Body shell does not fit the chassis correctly.
Ensure you are using the correct Tamiya model number (58122 or 58502) for which this body shell is designed. Verify that all mounting points align and that no parts of the chassis are obstructing the fit.
Paint is peeling or not adhering properly.
Ensure the body shell surface is clean and free of grease or dust before painting. Use polycarbonate-specific spray paints and apply in thin, even coats, allowing adequate drying time between coats.
Decals are not sticking or are difficult to position.
Make sure the surface where the decal is being applied is clean and smooth. Use a mild soap and water solution to temporarily wet the surface, allowing you to slide the decal into the correct position before gently pressing it down to remove air bubbles.
Pros and Cons
Pros
- Provides an authentic and iconic look for compatible R/C models.
- Allows for personal customization through painting and decal application.
- High-quality molding ensures good detail and a realistic appearance.
- Designed for straightforward installation on specified Tamiya chassis.
Cons
- This is a body shell only and requires separate purchase of chassis, electronics, and assembly tools.
- Requires painting and decal application, adding to the overall build time and cost.
- May require advanced modeling skills for optimal painting and finishing.
- Compatibility is limited to specific Tamiya model numbers.
Setup, Compatibility & Care
Compatibility: This Tamiya Blitzer Beetle body shell is specifically designed for the following Tamiya R/C models:
- 58122: Blitzer Beetle
- 58502: Blitzer Beetle 2011
Setup:
- Decal Application: Carefully apply the included decals according to the kit's instructions. Ensure the surface is clean and free of dust.
- Painting: The body shell is typically molded in a specific color but is intended to be painted. Use polycarbonate-safe spray paints for best results. Several light coats are recommended over one heavy coat.
- Trimming: Carefully trim the body shell along the cut lines, usually with a hobby knife or scissors.
- Mounting: Secure the body shell to the chassis using the appropriate mounting hardware (often sold separately or included with the chassis kit).
Care:
- Clean the body shell with a soft, damp cloth. Avoid using harsh solvents or abrasive cleaners, as these can damage the paint and plastic.
- Store the R/C car away from direct sunlight and extreme temperatures to prevent fading or warping of the body shell.