Best current price£31.90from Vevor UK
Shopping.co.uk recommended and popular offers
Vevor UK£31.90Visit shop VEVOR NEMA Steel Enclosure ,12 x 8 x 6'' NEMA 4X Steel Electrical Box, IP66 Waterproof & Dustproof, Outdoor/Indoor Electrical Junction Box, with Mounting Plate
Visit shop1 offer from £31.90
View price history by clicking the chart icon.
The VEVOR NEMA steel enclosure is an essential solution for professionals and DIY enthusiasts who need a rugged, weather-resistant housing for electrical components in indoor or outdoor environments. Its primary benefit lies in its IP66-rated protection, which shields sensitive equipment from moisture and dust through a reinforced, sealed door design. A notable caveat is that the 1.5 mm cold-rolled carbon steel construction adds significant weight, meaning it requires a sturdy mounting surface to ensure safe and long-term installation.
| Model Part Number | SPT |
|---|---|
| Brand | VEVOR |
While the powder coating is highly durable, it is not explicitly rated for direct saltwater spray exposure; use in high-salinity areas may require additional corrosion protection.
Yes, you can modify the steel casing; however, ensure you use the correct tools for cold-rolled steel and reseal any new openings properly to maintain the IP66 rating.
IP66 means the enclosure is completely protected against dust ingress and can withstand powerful water jets from any direction.
Yes, the product comes with the necessary hardware and keys required to operate the locking mechanism.
Yes, the galvanized mounting backplate is detachable, allowing you to prep your wiring and components outside of the box before final installation.
Verify that the door seal is clean and not damaged; ensure all cable entry points are properly sealed with appropriate cable glands.
Apply a small amount of non-conductive lubricant to the hinge pin area.
Ensure that the mounting surface is flat and you are using appropriate anchors for the specific wall material (e.g., masonry anchors for brick).
Installation should begin by marking the mounting holes using the pre-drilled pattern on the back of the enclosure. For concrete or brick walls, use appropriate expansion bolts. Once mounted, attach your equipment to the galvanized backplate. Ensure all conduit entry points at the bottom are sealed with waterproof connectors to maintain the IP66 rating.
For maintenance, wipe the enclosure with a mild detergent and a soft cloth to prevent the accumulation of corrosive agents. Check the foam sealing strip annually for signs of degradation; if the strip becomes brittle, it should be replaced to ensure the seal remains airtight. Keep the locking mechanism clear of debris and apply a light silicone lubricant if the hinge or lock feels stiff.
