Best current price£16.99from eBay
Shopping.co.uk recommended and popular offers
eBay£16.99Visit shop 2x Bartoline Filler Primer Quick Drying Plastic Metal Wood Adhesion White 400mL
Visit shop
B&Q£27.99Visit shop B&Q - 2X Filler Primer Quick Drying Plastic Metal Wood Adhesion White 400Ml
Visit shop3 offers from £16.99 - £27.99
View price history by clicking the chart icon.
The Bartoline Filler Primer is an essential tool for DIY enthusiasts and professionals looking to achieve a flawless, smooth finish on wood, metal, and rigid plastic surfaces. By effectively masking minor surface imperfections and providing a superior foundation for topcoats, it ensures professional-grade results. Users should note that this product is solvent-based and must be applied exclusively in outdoor or well-ventilated settings to ensure safety and optimal drying performance.
| Colour | White |
|---|---|
| Model Part Number | PP4435 |
| Brand | Bartoline |
No, this product should only be used outdoors or in well-ventilated areas due to the nature of the aerosol formulation.
You can apply topcoats after the primer has fully hardened, which takes 24 hours.
It is intended for rigid plastics. It may not adhere well to flexible or 'oily' plastics like polyethylene.
While it provides good adhesion, a light scuff-sand of the surface beforehand helps ensure the best possible bond.
The product performs best when applied in temperatures between 15 and 25 degrees Celsius.
You should remove loose rust and contaminants first. While it provides a base, it is not a rust-inhibitor and should be used over treated or cleaned metal.
Invert the can and spray for several seconds to clear the valve, or remove the nozzle and soak it in a solvent cleaner.
You are applying too much material at once. Reduce the spray pressure or increase the distance from the surface, and always apply in thinner coats.
Lightly sand the surface with a fine-grit sandpaper between coats to achieve a smooth finish before applying your final paint.
Before starting, ensure the target surface is thoroughly cleaned and free of grease, dust, or flaking paint. Shake the aerosol can vigorously for at least two minutes to ensure the propellant and filler are properly mixed. Maintain a consistent distance of 15-25cm from the surface during application. After each use, it is critical to turn the can upside down and press the nozzle for a few seconds to clear any residue; this prevents the internal tube from clogging. Always work in an area with a temperature between 15-25 degrees Celsius to ensure the primer cures correctly.
