Best current price£26.99from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£26.99Visit shop Einhell 2030365 Einhell Bt-Bo Jump Lead Aluminium Copper 3.50M LED...
Visit shop3 offers from £26.99 - £29.00
View price history by clicking the chart icon.
This Einhell Booster Cable (model BT-BO 25/1 A LED SP) is designed for vehicle owners needing a reliable way to jump-start a dead battery. Its key benefit is enhanced safety and visibility during use, thanks to LED lighting and electronic voltage spike protection. A potential consideration is its aluminum conductor, which requires careful handling compared to pure copper for optimal conductivity.
| Model Part Number | 2030365 |
|---|---|
| Brand | Einhell |
The Einhell BT-BO 25/1 A LED SP Booster Cable has a maximum current rating of 350 Amperes.
These cables feature integrated LED lights on the terminal pliers for better visibility and electronic protection against voltage spikes, enhancing safety during jump-starting.
They are designed for 12V vehicle electrical systems and are suitable for most gasoline and diesel engines within certain displacement limits. Always refer to your vehicle's manual.
The conductor material is aluminum with a cross-sectional area of 31.4 mm², which is equivalent to 25 mm² of copper cable in terms of conductivity.
The cable length is 3.5 meters (350 cm).
Yes, the booster cables come with a practical carry bag for storage and transport.
Yes, they are compliant with DIN 72553-25 standards.
Ensure all clamps are securely connected to the correct terminals (+ to +, - to unpainted metal). Check that the good battery's vehicle is running and has been for a few minutes. The dead battery may be completely unserviceable or the jump-start may not provide enough charge. In some cases, a longer charging period might be necessary.
Check the connection of the LED module within the plier head. Ensure the battery inside the plier housing (if applicable, consult manual) is functional and correctly installed. Inspect the wiring for any breaks.
Ensure the final black clamp is connected to an unpainted metal surface away from the battery and fuel lines, not directly to the negative terminal of the dead battery. Double-check that both vehicles are turned off before connecting.
This could indicate a poor connection or an excessive current draw beyond the cable's rating. Disconnect immediately and inspect all connections. If the issue persists or if the cable is unusually hot, discontinue use.
Setup: Ensure both vehicles are parked close enough for the 3.5-meter cables to reach, but not touching. Turn off both vehicles and remove keys from the ignition. Connect the red (+) clamp to the positive terminal of the dead battery, then connect the other red (+) clamp to the positive terminal of the good battery. Connect the black (-) clamp to the negative terminal of the good battery, and finally, connect the other black (-) clamp to an unpainted metal surface on the engine block or chassis of the vehicle with the dead battery, away from the battery itself. Start the good vehicle and let it run for a few minutes. Then, attempt to start the vehicle with the dead battery. Once started, carefully remove the cables in the reverse order: black from the chassis, black from the good battery, red from the good battery, and red from the dead battery.
Compatibility: This booster cable is generally compatible with 12V vehicle electrical systems. While rated for a maximum of 350A, it is best suited for gasoline engines up to approximately 2500cc and diesel engines up to approximately 2000cc. Always consult your vehicle's owner's manual before jump-starting.
Care: After each use, clean the terminal pliers and cable ends with a dry cloth to remove any dirt or corrosion. Inspect the cables and insulation for any signs of damage, cuts, or wear. Store the cables in the provided carry bag in a dry, protected location, away from extreme temperatures and sharp objects. Avoid kinking or tightly coiling the cables, as this can damage the conductor.
