Bosch SDS Plus Hammer Masonry Drill Bit - 6 x 160mm Alloy Steel - 2 608 831 008

This drill bit is compatible with rotary hammer drills that use an SDS Plus chuck system.

This drill bit is designed for use in concrete and concrete with rebar.

Insert the SDS Plus shank into the chuck of your rotary hammer drill. Make sure it is securely locked.

Avoid applying excessive force. Allow the drill bit to do the work, and periodically remove the bit to clear out debris and prevent overheating.

PGM approval ensures that the drill bit meets the required standards for diameter accuracy.

Use a brush or compressed air to remove debris after each use. Store it in a clean, dry environment.

The centering tip ensures a precise drilling start and helps maintain good guidance within the drilled hole.

Check the drill bit for wear and tear. If the carbide tip is damaged, replace the bit. Ensure the drill is set to hammer mode and that you are using the correct speed for the material.

Clear the debris from the hole. You might need to withdraw the bit and clean the flutes to allow for better dust removal. Ensure that you are not applying too much pressure.

Reduce the drilling speed and allow the bit to cool. Withdraw the bit periodically to clear out debris and improve airflow. If the issue persists, consider using a drilling lubricant.