Theben / Timeguard Outdoor Multi-Connector Box - 4G 13A Socket Strip

IP55 means the enclosure is protected against dust ingress (the '5') and protected against water jets from any direction (the second '5'). This makes it suitable for most outdoor environments.

Basic installation can be performed by those with electrical knowledge. However, due to safety regulations, it is recommended to have a qualified electrician perform the installation, especially if you are unsure about wiring.

The total load across all four sockets combined should not exceed 13 Amps (13A) or the rated power of the circuit it is connected to, whichever is lower.

Yes, the IP55 rating and durable polycarbonate construction are designed for permanent outdoor installation, protecting the sockets from weather elements.

This multi-connector box uses standard UK Type G sockets, commonly known as 13A plugs.

Mounting screws are typically not included, as the type and length required can vary depending on the mounting surface. Please use appropriate fixings for your installation.

The socket strip is a component within the box. While it may be possible to replace it with a compatible 4-gang 13A strip, this would require electrical work and should only be done by a qualified person. The product is designed to be used as supplied.

Check that the main power supply is switched on. Verify wiring connections are secure and correct. Ensure the circuit breaker has not tripped. Test with a known working device.

Inspect the lid seal for damage or debris. Ensure the lid is properly closed and latched. Check mounting for any gaps where water could enter. Contact a professional if persistent.

Reduce the number of devices connected. Ensure the total load does not exceed 13A. Check connected devices for faults.