Best current price£8.95from Tooled Up
Shopping.co.uk recommended and popular offers
Tooled Up£8.95Visit shop Makita 76Mm X 457Mm Sanding Belts
Visit shop
B&Q£14.00Visit shop B&Q - P-37166 3 X Sanding Belts 40 80 120 Grit Medium 76 X 457mm 9911 Sander
Visit shop6 offers from £8.95 - £14.00
View price history by clicking the chart icon.
This Makita P-37166 sanding belt set is designed for users of medium-power belt sanders looking for efficient material removal and surface preparation. It offers a versatile range of grits (40, 80, 120) for tackling wood, regular steel, and paint removal. A potential caveat is the specific size (76mm x 457mm), which may not fit all belt sander models.
| Model Part Number | P-37166 |
|---|---|
| Brand | Makita |
These belts are suitable for wood, regular steel, and are effective for removing paint.
This pack includes three grits: 40G (Coarse), 80G (Medium), and 120G (Fine).
They are designed for medium-power belt sanders that accept the 76 mm x 457 mm belt size. Examples include the Skil B&D 9911.
Use 40G for heavy stock removal and stripping. Use 80G for general smoothing. Use 120G for finer surface preparation before finishing.
The 120-grit belt is considered fine for initial preparation. For very fine finishing or sanding between coats, you would need to purchase higher grit belts separately.
Each pack contains 3 sanding belts.
Adjust the tracking knob on your belt sander. Ensure the belt is installed correctly and is not damaged.
Reduce sanding pressure. Ensure you are using the correct grit for the material. Check for any obstructions or sharp edges on the sander itself.
Ensure the correct grit is being used for the material. Clean any debris from the belt surface. Check if the belt is worn out and needs replacement.
Setup: Ensure your belt sander is unplugged before installing or changing belts. Align the new sanding belt onto the sander's rollers. Adjust the tracking knob on the sander to ensure the belt runs centered on the rollers when the sander is turned on at a low speed.
Compatibility: These belts are 76 mm wide and 457 mm long. They are designed for use with medium-power belt sanders that accept these dimensions. Always verify your sander's belt size requirements before purchasing.
Care: To maximize belt life, avoid excessive pressure, which can cause premature wear or overheating. Keep the belt clean from dust and debris. Store belts in a dry environment to prevent damage to the cloth backing.
