Rust-Oleum Hard Hat Aerosol - Satin Black
Best current price£17.95from Tooled Up
Best offers
Shopping.co.uk recommended and popular offers
Tooled Up£17.95Visit shop Rust Oleum Black Satin Hard Hat Metal Spray Paint
Visit shopTooled Up£17.95Visit shop All Offers
3 offers from £17.95 - £30.94
View price history by clicking the chart icon.
OnBuy.comRust-Oleum 2176 Satin Black Hard Hat Aerosol 500Ml
Free delivery in 1–3 days
£30.94
Visit shop
Rust-Oleum 2176 Satin Black Hard Hat Aerosol 500Ml 8715743004001Free delivery in 1–3 days£30.94Visit shop →
Product Information
Full details
This guide is for users of Rust-Oleum Hard Hat Aerosol - Satin Black, offering a durable and protective finish for various surfaces. The key benefit is a fast-drying, high-gloss finish that's ideal for small maintenance jobs and touch-ups. However, be aware that discoloration may occur above 65°C. This guide provides essential information on using this product effectively.
All features
| Colour | Black |
|---|---|
| Brand | Rust-Oleum |
Extended Product Information
FAQs
What is the recommended film thickness?
The recommended dry film thickness is 25 µm, which is approximately 100 µm wet.
What surfaces can I use this on?
It is intended for use on properly prepared painted substrates, and metal surfaces.
What is the drying time?
It dries to the touch in 15 minutes and to handle in 30 minutes. Recoat within 1 hour or after 48 hours.
What is the coverage of one can?
Theoretical coverage is 2.5 m² per 500 ml can.
Can this be used outdoors?
It is best for interior applications and light industrial exposures.
What should I do if the paint starts to run?
Stop spraying immediately and allow the paint to dry completely. Then, lightly sand the area and reapply in thinner coats.
How should I store the spray can?
Store in a cool, dry place away from direct sunlight and heat sources.
Troubleshooting
Uneven finish or runs
Apply thinner coats and avoid spraying too close to the surface. Ensure proper shaking of the can before use.
Slow drying time
Ensure adequate ventilation and apply the paint in a well-ventilated area. Check the temperature and humidity levels.
Clogging of the nozzle
Clean the nozzle after use by turning the can upside down and spraying until only propellant comes out.
Pros and Cons
Pros
- Fast drying time saves time on projects.
- Provides a high-gloss, professional finish.
- Offers good coverage for effective use.
- Lead- and chromate-free formula is environmentally friendly.
- Easy to apply with aerosol spray.
- Suitable for a range of applications
Cons
- Discoloration may occur at temperatures above 65°C.
- Limited to small maintenance jobs or touch-ups.
- Practical coverage can vary based on the substrate.
- Not suitable for heavy industrial exposures.
- Requires proper surface preparation for best results.
- Recoating must be done within 1 hour or after 48 hours
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from rust, loose paint, or contaminants. For optimal results, use RUST-OLEUM Hard Hat 2169/2182 Primers.
- Application: Shake the can well before use. Apply in thin, even coats, holding the can 20-30 cm from the surface.
- Drying Time: Allow 15 minutes to dry to the touch, 30 minutes to handle, and recoat within 1 hour or after 48 hours. Full hardness is achieved after 7 days.
- Compatibility: This product is compatible with RUST-OLEUM Hard Hat 2169/2182 Primers.
- Storage: Store the can in a cool, dry place. Protect from direct sunlight and temperatures exceeding 50°C.