Best current price£7.99from eBay
Shopping.co.uk recommended and popular offers
eBay£7.99Visit shop Pro-Matic Colour Coat Grey Primer Matt Aerosol Spray Paint 400ml
Visit shop
B&Q£9.99Visit shop B&Q - Colour Coat Grey Primer Matt Paint 400Ml
Visit shop3 offers from £7.99 - £10.49
View price history by clicking the chart icon.
Colour Coat Primer Paint is an essential solution for DIY enthusiasts and professionals seeking a high-quality base for furniture, home decor, and general renovation projects. Its key benefit is a highly pigmented, quick-drying formula that provides excellent adhesion and a smooth finish on surfaces like wood, metal, plaster, and masonry. While it offers superior durability and scratch resistance, users should note that the 400ml volume is best suited for small to medium-sized projects rather than large-scale exterior wall coverage.
| Colour | Grey |
|---|---|
| Model Part Number | CCPGP400 |
| Brand | Colour Coat |
| Container Volume | 400ml |
Yes, it is formulated with low VOCs, making it suitable for indoor furniture and decor projects provided there is adequate ventilation.
Yes, Colour Coat is designed to work on metal surfaces, helping to prevent oxidation and providing a durable base for topcoats.
Due to the highly pigmented formula, usually one to two light coats are sufficient, depending on the porosity and colour of the substrate.
While drying time varies by temperature and humidity, its quick-drying formula is designed for rapid project turnaround.
For best results, especially on glossy or very smooth surfaces, a light sanding will significantly improve adhesion and overall finish quality.
Hold the can further away from the surface and apply thinner, lighter coats rather than one thick layer.
Remove the nozzle and soak in solvent, or replace if necessary. Always clear the nozzle after use.
Ensure the surface was thoroughly cleaned of all grease and dust, and verify that the surface was sanded to provide a mechanical key.
Before applying, ensure the surface is clean, dry, and free of dust, grease, or loose debris. For best results, lightly sand glossy surfaces to create a profile for the primer to bond to. Shake the 400ml container vigorously for at least one minute before use to ensure the pigments are thoroughly mixed. Apply in light, even strokes from a distance of approximately 20-30cm to prevent runs or pooling. Between coats, allow sufficient time for drying as specified by environmental conditions. Clean the nozzle after each use by turning the can upside down and spraying for a few seconds to prevent clogging. Store in a cool, dry place away from direct sunlight and extreme temperatures to maintain the integrity of the formula.
