AS Creation Black Granite Glitter Tiles Slate Stone Kitchen Bathroom Wallpaper - Striped

Use a high-quality adhesive specifically designed for heavy vinyl wallpapers. Follow the wallpaper paste manufacturer's instructions, as the application method (paste the wall or paste the paper) may vary.

You can gently wipe the surface with a damp cloth. Avoid using harsh chemicals or abrasive cleaning tools, as these can damage the textured finish and glitter elements.

While it is suitable for bathrooms due to its washability, it is not recommended for direct contact with water or in areas of constant high humidity like inside a shower cubicle. Ensure good ventilation.

The pattern repeat is 64cm horizontally and 32cm vertically. This means you will need to align the pattern every 64cm across the width and every 32cm up the height of your wall.

Measure the height and width of your walls and divide by the roll dimensions (10.05m x 0.53m). Account for the pattern repeat and wastage, especially on walls with many windows or doors, or where pattern matching is critical.

Yes, this wallpaper is designed to be peelable, which means it can be removed in large sections when you are ready to redecorate, ideally from a dry peel.

The model number is WL-34779-3.

Gently lift the affected area and re-smooth with a wallpaper brush or smoother, working from the center outwards. Ensure adequate paste coverage and smooth thoroughly during application.

Double-check the pattern repeat measurement (64/32cm). Ensure the previous strip is perfectly vertical and level before hanging the next. Make slight adjustments before the paste sets.

Use a very sharp utility knife and a metal straight edge. Change the blade frequently for clean cuts. Ensure the wallpaper is fully adhered before trimming.

Ensure you have used the correct type of wallpaper paste for heavy vinyl wallpapers. Check that the paste has been applied evenly and sufficiently to both the paper and the wall (if applicable).