Best current price£41.99from eBay
Shopping.co.uk recommended and popular offers
eBay£41.99Visit shop KATSU Tools 6 Inch 150mm Vise Mount Metal Brake Bender Attachment
Visit shop1 offer from £41.99
View price history by clicking the chart icon.
The KATSU Tools 6-inch Vise Mount Metal Brake Bender Attachment (165160) is designed for metalworkers, automotive hobbyists, and HVAC technicians who require precision sheet metal fabrication in a compact footprint. By converting your existing bench vise into a powerful bending station, this tool delivers the capability to form 14-gauge mild steel or 1/8-inch aluminum with ease; however, users should note that its performance is strictly dependent on the stability and quality of the bench vise it is attached to.
| Model Part Number | 165160 |
|---|---|
| Brand | KATSU Tools |
No, this specific model is designed for a minimum jaw width of 6 inches (150mm) to ensure stability and proper alignment.
While it can handle mild steel, stainless steel is significantly harder and may exceed the rated capacity. It is recommended to stick to mild steel and aluminum.
The unit is designed to be clamped directly into your existing bench vise, so no additional mounting hardware is required.
Yes, by utilizing the interchangeable finger dies, you can fold the sides of a metal sheet up to create boxes of various sizes.
It is rated for up to 14-gauge (2mm) mild steel and 1/8-inch (3mm) aluminum.
Increase the tension on the bench vise or check if the jaws of the vise have a grippy surface. Ensure the material is not oily.
Check that the workpiece is perfectly flush against the backstop. If the material is springy, you may need to 'over-bend' slightly beyond 90 degrees to account for spring-back.
Ensure the vise itself is bolted securely to the workbench. If the vise moves, the bending force will not be transferred effectively to the metal.
To set up, simply open your 6-inch bench vise jaws wide enough to clear the mounting base of the brake. Position the brake assembly on the vise jaws and tighten the vise until the attachment is held firmly in place. Ensure the unit is level to prevent uneven bends. After use, wipe down the hardened dies with a light machine oil to prevent surface rust, especially if working in humid environments. Periodically check the mounting bolts on the attachment to ensure they remain snug and that there is no lateral play in the hinge mechanism.
