Slime 20 inch BMX Folding Bike Self Sealing Inner Tube - Schrader Valve - 2 Pack

Keep your rides uninterrupted with this set of two 20-inch bike inner tubes. Pre-filled with Slime...

Best current price£31.00from Homebase

All Offers

3 offers from £31.00

View price history by clicking the chart icon.

HomebaseSlime 20 Inch Bmx Folding Bike Self Sealing Inner Tube With Schrader Valve 2 Pack
Free delivery in 1–3 days
£31.00
Visit shop
wilkoSlime 20 inch BMX Folding Bike Inner Tube with Schrader Valve - 2 Pack
Free delivery in 1–3 days
£31.00
Visit shop

Product Information

Full details

This 2-pack of Slime 20-inch inner tubes is designed for BMX and folding bike riders who want to eliminate the hassle of trailside flat repairs. Featuring a pre-filled sealant that automatically plugs punctures up to 3mm, these tubes provide reliable, continuous protection during your ride; however, users should note that the added weight of the sealant makes them slightly heavier than standard racing tubes.

All features

BrandSlime

Extended Product Information

FAQs

Will these fit any 20-inch tire?

These are designed for standard 20-inch BMX and folding bike tires; always check your tire sidewall for the specific ETRTO measurement to ensure compatibility.

Can I use a CO2 inflator with these tubes?

Yes, but be aware that some CO2 cartridges can cause the sealant to freeze or clump if applied too rapidly.

Do I need special tools to install them?

No, you only need standard tire levers to remove the tire from the rim.

What is the maximum size puncture it can seal?

The sealant is effective on punctures up to 3mm in diameter.

How often do I need to replace the sealant inside?

The sealant is permanently contained within the tube; if the tube fails to seal a puncture, the tube should be replaced.

Troubleshooting

Tube losing pressure slowly

Check the valve core to ensure it is tightened properly and verify that no large objects are still embedded in the tire casing.

Sealant leaking from the valve

Clear any excess sealant from the valve pin and ensure the valve cap is securely tightened after inflation.

Pros and Cons

Pros

  • Reduces the risk of being stranded by flat tires
  • Easy inflation using standard bike pumps
  • Quick and simple installation process
  • Effective against most common thorns and debris

Cons

  • Slightly heavier than non-sealant inner tubes
  • Not intended for large sidewall tears or cuts
  • Sealant can occasionally clog valve cores if not maintained

Setup, Compatibility & Care

Installation follows the same procedure as a standard inner tube: remove your old tube, ensure the inside of the tire casing is clear of the original cause of the flat, and install the Slime tube. Always inflate the tube slightly before inserting it into the tire to prevent pinches. Regarding care, because the valve uses a Schrader mechanism, occasionally wipe down the valve tip to prevent dried sealant from affecting the pressure seal. If you notice a slow leak over many months, it may be time to inspect the tire for large embedded debris that the sealant cannot fully bridge.

Price History

DatePrice
Visit shop