TIMco Steel Narrow Pattern Uncranked Fixed Pin Butt Hinge - Silver - 100 x 58 x 1.5mm

No, these hinges have a Corrosion Rating of 2 and are specifically designed for internal applications. They are not built to withstand external weather conditions.

The product information suggests using screws with a recommended diameter of 4.0mm, corresponding to an 8-gauge screw. You will need 16 screws per pair.

These are fixed pin hinges. To remove the door, you would need to unscrew the hinges from either the door or the frame. They are not designed for easy, tool-less removal.

Each pair of these hinges has a maximum door weight capacity of 30kg.

The product description does not state that screws are included. Typically, screws are sold separately for hinges.

An 'uncranked' hinge means it does not have any offset bends in the hinge leaves, resulting in a flat and flush profile when closed.

Clean the zinc finish with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the protective coating.

Apply a small amount of appropriate lubricant (like graphite powder or a light machine oil) to the hinge pin. Ensure screws are tight.

Check that the hinges are mortised correctly and are perfectly aligned. Loosen screws slightly, adjust alignment, and retighten.

Ensure the hinge knuckles are clean and free of debris. If the pin is stuck, a light tap with a hammer might help. For removal, a pin punch can be used.

Clean the affected area gently with a soft cloth. For minor spots, a light application of lubricant might help protect the surface. Consider if the environment exceeds the recommended corrosion rating.