Tallas D-CWP 300 - 7 metre drain hose
Best current price£114.00from Waterpump UK
Best offers
Shopping.co.uk recommended and popular offers
Waterpump UK£114.00Visit shop Tallas Blue / Black D-Cwp 300 With A 7 Metre Drain Hose
Visit shopWaterpump UK£114.00Visit shop All Offers
2 offers from £114.00 - £154.00
View price history by clicking the chart icon.
Waterpump UKTallas Blue / Black D-Cwp 300 With A 7 Metre Drain Hose
£9.95 delivery
£114.00
Visit shop
Tallas Blue / Black D-Cwp 600 With A 7 Metre Drain HoseFree delivery in 1–3 days£154.00Visit shop →
Product Information
Full details
This guide helps users understand and effectively use the Tallas D-CWP 300 submersible pump. Designed for draining water to a near-dry level, it's ideal for flooded areas or removing residual water. Note that this pump is designed to switch on automatically at a water level of 11.5 cm. This model includes a built-in float switch for automatic operation and can be used in spaces with a diameter of about 20 cm.
All features
| Model Part Number | SOLVKIT011 |
|---|---|
| Brand | Tallas |
Extended Product Information
FAQs
How does the automatic on/off function work?
The pump has a float switch that automatically turns the pump on when the water level reaches 11.5 cm and turns it off at 4.5 cm.
Can I use this pump in a small space?
Yes, this pump is designed to operate in spaces with a diameter of about 20 cm.
What is the maximum water level the pump can handle?
The pump can start pumping at a water level of 11.5 cm.
What is the lowest water level the pump can drain to?
In manual mode, the pump can drain water to a level of 2 mm.
Does the pump come with a hose?
Yes, the pump is supplied with a 7-meter drain hose.
What should I do if the pump stops working?
Check the power supply, the hose for blockages, and the pump for any debris. Refer to the troubleshooting section for further assistance.
What is the purpose of the non-return valve?
The non-return valve prevents water from flowing back into the drained area when the pump is turned off.
Troubleshooting
Pump does not turn on.
Check the power supply and ensure the float switch is not obstructed.
Pump runs but does not drain water.
Check the hose for kinks or blockages. Inspect the impeller for debris.
Pump turns off before the water is fully drained.
Ensure the float switch is set to 'manual' to drain to 2 mm.
Pros and Cons
Pros
- Drains water to a very low level (2 mm).
- Automatic operation with a float switch for convenience.
- Suitable for use in small spaces.
- Includes a non-return valve.
- Can be operated manually.
Cons
- Automatic switch-on requires a water level of 11.5 cm.
- Not suitable for pumping water with large debris.
- Manual mode required for drainage below the automatic shut-off level.
Setup, Compatibility & Care
- Placement: Place the pump on a stable surface in the area you wish to drain.
- Connection: Connect the included 7-meter drain hose to the pump's outlet.
- Power: Plug the pump into a grounded electrical outlet.
- Operation: Ensure the float switch is set to 'automatic' for automatic operation, or 'manual' for continuous pumping to 2 mm.
Care:
- Regularly check the pump for debris and blockages.
- Clean the pump and filter after each use.
- Store the pump in a dry place when not in use.