Autotek - Mazda Copper Red - 300ml
Best current price£11.19from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£11.19Visit shop Autotek Mazda Copper Red Fast Drying Aerosol Spray Paint 300ml
Visit shopeBay£11.19Visit shop All Offers
4 offers from £11.19 - £12.99
View price history by clicking the chart icon.
eBayAutotek Mazda Copper Red Fast Drying Aerosol Spray Paint 300ml
Free delivery in 1–3 days
£11.19
Visit shop
Autotek Mazda Copper Red Fast Drying Aerosol Spray Paint 300mlFree delivery in 1–3 days£12.99Visit shop →
My Motor WorldAutotek Red Mazda Copper Spray Paint 300Ml
Free delivery in 1–3 days
£12.99
Visit shop
Autotek Red Mazda Copper Spray Paint 300MlFree delivery in 1–3 days£12.99Visit shop →
Product Information
Full details
This guide is for car owners and enthusiasts needing to touch up or repaint areas on Mazda vehicles manufactured between 2005 and 2015. The key benefit is achieving an exact colour match with a durable, fast-drying finish. A potential caveat is the need for proper surface preparation and application in a well-ventilated area. Autotek Mazda Copper Red is a 300ml aerosol spray paint, featuring an acrylic-based formula designed for precise colour replication and protective properties.
All features
| Colour | Red |
|---|---|
| Model Part Number | ATOMC304300 |
| Brand | Autotek |
| Container Volume | 300ml |
Extended Product Information
FAQs
What specific Mazda models is this paint compatible with?
Autotek Mazda Copper Red (32V) is designed for compatibility with Mazda models manufactured between 2005 and 2015.
Can I use this paint on different types of surfaces?
Yes, the paint is suitable for application on metal, glass fibre, and rigid plastic surfaces.
How long does the paint take to dry?
The paint should be touch dry in 10-20 minutes. Full curing of the paint coat takes approximately 24 hours.
What is the best way to prepare the surface before painting?
Clean the area thoroughly to remove dirt, rust, and grease. Mask off surrounding areas and apply a minimum of two coats of primer for optimal adhesion.
What conditions are recommended for applying this paint?
The paint should be applied outdoors or in a well-ventilated area at temperatures between 15°C and 25°C.
How do I prevent the nozzle from clogging?
After each use, turn the can upside down and spray for 2-5 seconds to clear the nozzle. Store the can upright after use.
Can this paint be used over existing paintwork?
Yes, it is compatible with nearly all automotive paint finishes, including cellulose finishes.
Troubleshooting
Uneven spray or splattering
Ensure the aerosol can is shaken thoroughly for at least 2 minutes before and during use. Check that the nozzle is not blocked by attempting to spray upside down for a few seconds. Maintain a consistent distance of 15-25cm from the surface.
Paint not adhering well
Verify that the surface was properly cleaned and free from contaminants like wax or oil. Ensure a primer (such as Autotek Red Primer) was applied, especially on bare surfaces, following the recommended minimum of two coats.
Drips or runs in the paint finish
Apply paint in several thin coats rather than one thick coat. Ensure adequate drying time (10-20 minutes) between coats. Reduce the amount of paint applied in each pass.
Nozzle blockage after use
Always turn the can upside down and spray for 2-5 seconds immediately after finishing your application to clear residual paint from the nozzle.
Color does not match exactly
Confirm the vehicle's paint code is 32V and that the vehicle is within the 2005-2015 model year range. Age and fading of original paint can affect perceived match; ensure consistent application for best results.
Pros and Cons
Pros
- Achieves an exact colour match for specific Mazda models.
- Durable and long-lasting finish due to acrylic base.
- Fast-drying formula speeds up the painting process.
- Suitable for various automotive surfaces.
- Provides a smooth, professional appearance.
Cons
- Requires thorough surface preparation for optimal results.
- Must be used in a well-ventilated area or outdoors.
- Ideal application temperature range (15°C-25°C) may limit use.
- Full curing takes 24 hours, requiring patience.
- Can only be used as directed, implying specific usage constraints.
Setup, Compatibility & Care
Preparation:
- Thoroughly clean the target area, ensuring it is free from dirt, rust, grease, and wax.
- Mask off adjacent areas to prevent overspray.
- For best adhesion and finish, apply a minimum of two coats of Autotek Red Primer.
Application:
- Shake the aerosol can vigorously for at least two minutes before use.
- Hold the can 15-25cm away from the surface.
- Apply in several thin coats, allowing 10-20 minutes drying time between each coat.
- After each application, turn the can upside down and spray for 2-5 seconds to clear the nozzle and prevent blockages.
- Ensure the area is fully cured for 24 hours after the final coat.
Usage Conditions:
- Use only outdoors or in a well-ventilated area.
- Ideal temperature range for application is between 15°C and 25°C.
Compatibility:
- Compatible with most automotive paint finishes, including cellulose.
- Suitable for metal, glass fibre, and rigid plastic surfaces.
Care:
- Store in a cool, dry place away from direct sunlight and heat.
- Ensure the nozzle is clean after use to prevent clogging for future applications.