Best current price£3.00from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£3.00Visit shop (Straight Joiner 6Mm) Brass T Y Joiner Various Piece Fuel Hose Gas Joiner Tee Connector (Various Size) 5056697211125
Visit shop
B&Q£3.47Visit shop B&Q - Brass T Y Joiner Various Piece Fuel Hose Gas Joiner Tee Connector Straight Joiner 6mm
Visit shop2 offers from £3.00 - £3.47
View price history by clicking the chart icon.
The B2C Brass Hose Joiner (6mm) is the ideal solution for DIY enthusiasts, automotive technicians, and professionals looking to create custom fuel or gas line installations. Engineered for longevity, this component provides a secure, leak-resistant connection for 6mm flexible hoses, though users should ensure their hose material is compatible with the intended fluid or gas to avoid chemical degradation.
| Brand | B2C |
|---|
No, this joiner is intended for low-pressure applications such as fuel, gas, or air lines. It is not rated for high-pressure hydraulics.
No, the B2C Brass Hose Joiner is sold as the fitting alone; hose clamps must be purchased separately.
Brass is generally resistant to fuel, but you must ensure your hose material is specifically rated for ethanol compatibility.
The barb is designed to fit a 6mm internal diameter hose; the outer diameter of the barb is slightly larger to ensure a tight, leak-free grip.
Yes, provided the brass structure is not damaged or corroded during removal from the original hose.
Ensure a hose clamp is used and tightened properly over the barbed section.
Verify the hose inner diameter is exactly 6mm and inspect the hose for cracks or fatigue.
Lightly lubricate the barb with a compatible fluid or warm the end of the hose in hot water to soften it.
To install, ensure your hose has a clean, square-cut edge for a perfect seal. Push the hose onto the barb until it meets the center stop ring. Always secure the connection with an appropriate hose clamp.
Compatibility is limited to 6mm internal diameter (ID) flexible tubing. To maintain the joiner, periodically inspect the brass surface for signs of heavy corrosion and check the hose connection points for any dampness or weeping. Avoid using steel tools directly on the brass finish to prevent marring, which could create paths for leaks.
