Best current price£68.04from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£68.04Visit shop Draper 09706 Gravity Feed Hvlp Air Spray Gun 600Ml Each
Visit shop
B&Q£79.99Visit shop B&Q - Gravity Feed Hvlp Air Spray Gun600MlAluminium BodyAdjustable Flow
Visit shop12 offers from £68.04 - £99.50
View price history by clicking the chart icon.
This Draper HVLP spray gun is designed for general purpose spraying, ideal for DIY enthusiasts and professionals working with various paint types, including water-based formulations. Its key benefit is the HVLP (High Volume Low Pressure) technology, which ensures efficient paint transfer and reduces overspray, leading to a smoother finish and less wasted material. A potential caveat is the need for a suitable air compressor to achieve the optimal operating pressure.
| Model Part Number | 09706 |
|---|---|
| Brand | Draper |
This spray gun is suitable for use with all paint types, including water-based and solvent-based paints.
The recommended operating air pressure is 43psi (3 Bar).
The gravity feed cup has a capacity of 600ml.
The fluid nozzle size is 1.4mm.
The package includes 1 x Spray gun, 1 x Cleaning brush, and 1 x Service spanner.
Yes, spare nozzle, needle, and cap sets are available separately.
After each use, disassemble and clean the fluid nozzle, needle, and air cap with the provided brush and appropriate solvent or water. Ensure all parts are dry before reassembly.
Check if the nozzle and needle are aligned correctly. Ensure the paint is thinned to the correct viscosity. Adjust the fan control and air pressure.
The fluid needle or nozzle may be clogged. Clean the tip thoroughly. Ensure the paint is adequately thinned and that the fluid adjustment is set correctly.
Check for blockages in the nozzle or fluid feed tube. Ensure the fluid adjustment knob is turned sufficiently to allow adequate paint flow. Verify the air pressure is adequate.
Inspect the air cap and seals for damage. Tighten connections securely. If leaks persist, consider replacing worn seals or parts.
Setup: Connect the spray gun to an air compressor using a 1/4" BSP air inlet. Ensure the compressor is set to maintain an operating air pressure of 43psi (3 Bar). Fill the 600ml gravity feed cup with your chosen paint, ensuring it is properly thinned according to the paint manufacturer's recommendations. Adjust the fan pattern and fluid flow controls as needed before application.
Compatibility: This spray gun is compatible with all paint types, including water-based and solvent-based paints. It requires an air compressor capable of delivering approximately 14.5cfm (400 l/min) at the specified operating pressure.
Care: After each use, thoroughly clean the spray gun to prevent paint from drying and clogging the nozzle and needle. Disassemble the fluid nozzle, needle, and air cap. Use the provided cleaning brush and a suitable solvent or water (depending on the paint type) to clean all parts. Reassemble once dry. Store in a clean, dry environment. Spare nozzle, needle, and cap sets are available separately.
