TIMBERTECH Airbrush Kit with Compressor - Multicolor
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The TIMBERTECH Airbrush Kit with Compressor is designed for artists, designers, hobbyists, and professionals in fields like model making, cake decorating, nail art, and spray tanning who need consistent, high-quality airflow for detailed work. Its key benefit is providing powerful and constant working pressure with a strong airflow thanks to its oil-free piston compressor and 3L receiver tank, ensuring pulse-free output and a longer lifespan. A potential caveat for some users might be its weight at 14.56 pounds, making portability less ideal for very mobile setups.
All features
| Colour | Multicolor |
|---|---|
| Model Part Number | ABPST06 |
| Brand | TIMBERTECH |
Extended Product Information
FAQs
What type of airbrush guns are included?
The kit includes two airbrush guns: one gravity-feed and one suction/siphon feed. It also comes with multiple nozzle sizes (0.2mm, 0.3mm, and 0.5mm) to accommodate various applications.
Is this compressor suitable for beginners?
Yes, the autostart/autostop feature and integrated regulator simplify operation, making it suitable for beginners. However, learning airbrush techniques still requires practice.
How often should I drain the receiver tank?
It's recommended to drain the receiver tank periodically, especially after each use or at the end of a work session, to remove accumulated condensation and prevent internal corrosion.
Can I use this compressor for spray tanning?
Yes, the consistent airflow and pressure make it suitable for spray tanning applications, provided the airbrush gun used is designed for tanning solutions.
What maintenance does an oil-free compressor require?
The primary maintenance is cleaning or replacing the air filter regularly and draining the receiver tank. The oil-free design eliminates the need for oil changes.
What is the maximum operating pressure?
The compressor automatically stops at 4 Bar (approximately 58 PSI). The regulator allows you to set a working pressure lower than this for your specific airbrush needs.
Can I use this compressor with longer airbrush hoses?
While the compressor is designed for efficient operation, using excessively long hoses may affect pressure consistency. It's best to use hoses of appropriate length for optimal performance.
Troubleshooting
Compressor not starting
Ensure the power cord is securely plugged in and the power switch is on. Check if the circuit breaker has tripped. Verify that the autostart pressure (3 Bar) has been reached.
Weak or inconsistent airflow
Check and clean or replace the air filter. Ensure the air hose is not kinked or blocked. Verify the pressure regulator is set correctly and the airbrush nozzle is not clogged. Check for leaks in the hose connections.
Airbrush sputtering or spitting
This is often due to paint consistency issues or a clogged nozzle. Clean the airbrush thoroughly. Ensure your paint is properly thinned and mixed. Check the needle and nozzle for damage or blockages.
Compressor stops working after a short period
Ensure the unit is not overheating. Allow it to cool down. Check that the autostop pressure (4 Bar) is being reached. Make sure the receiver tank is not over-pressurized beyond its safe limits (though the automatic function should prevent this).
Pros and Cons
Pros
- Provides a consistent and pulse-free air supply for professional results.
- Includes multiple airbrush guns and nozzle sizes for immediate versatility.
- Autostart/Autostop feature enhances user convenience and compressor longevity.
- Oil-free design means cleaner air output and less maintenance.
- Suitable for a wide range of artistic and hobbyist applications.
Cons
- At 14.56 pounds, it is not the most portable option for on-the-go use.
- Requires a power source, limiting use in environments without electricity.
- The autostop pressure might need fine-tuning for specific ultra-low-pressure tasks.
- Initial setup might require some familiarity with air pressure regulators.
Setup, Compatibility & Care
Setup:
- Connect the air hose from the compressor's regulator to your chosen airbrush gun.
- Ensure the airbrush gun is properly assembled with the desired nozzle and needle.
- Fill the airbrush cup or bottle with your medium (paint, dye, etc.).
- Plug in the compressor and turn on the power switch.
- Adjust the pressure using the regulator knob to your desired setting (typically between 15-30 PSI for most airbrush tasks, but refer to your airbrush manual).
- The compressor will automatically start when pressure drops below 3 Bar and stop at 4 Bar.
Compatibility:
- This compressor is compatible with all airbrush guns featuring nozzle sizes from 0.2mm to 0.8mm.
- It is suitable for use with a wide range of airbrush mediums including acrylics, watercolors, inks, dyes, and lacquers (ensure your medium is thinned appropriately for airbrush use).
Care:
- Filter Maintenance: Regularly check and clean the air filter to ensure optimal airflow and prevent contaminants from entering the system. Replace if damaged.
- Drain Tank: Periodically drain any condensation from the receiver tank by opening the drain valve at the bottom to prevent rust and maintain air quality.
- Cleaning: Wipe down the exterior of the compressor and regulator with a soft, dry or slightly damp cloth. Avoid using harsh solvents.
- Storage: Store the unit in a clean, dry place when not in use.