Frenchic Jitterbug Al Fresco - Blue

It is suitable for ceramic wall tiles, but not recommended for very wet areas such as shower surrounds or bath surrounds where constant moisture may affect the finish.

A 250ml tin will cover approximately 2 square meters (2m²).

Yes, this paint is suitable for metal, including powder-coated radiators.

No, the Frenchic Al Fresco range is self-priming and self-sealing, meaning a separate primer is not required. It also dries to a hard-wearing, matte finish, so a topcoat is generally not needed unless extra protection is desired in very high-traffic areas.

Clean your brushes and tools with water immediately after use.

Yes, the paint is EN71-3 certified, making it safe for use on children's toys and furniture.

Recoat time is typically 1-2 hours, and the paint cures to a hard finish over 24 hours. Full cure can take up to 7 days.

Ensure the paint is thoroughly stirred. Apply thin, even coats using a quality brush or roller. Allow adequate drying time between coats. Consider a third coat if necessary.

Ensure the surface was clean, dry, and free from grease before application. For very slick surfaces, a light scuff sand might be beneficial prior to painting.

Ensure application is in a well-ventilated area with moderate temperature and humidity. Thick coats can extend drying times; apply thinner coats next time.

Colors can appear differently under various lighting conditions. Small test patches on the intended surface are recommended. The description notes a greenish hint in certain light.