Grease Nipple - Febi Bilstein - 06533 - Pack Of 100

A grease nipple, also known as a grease fitting or zerk fitting, provides a point for injecting lubricant into bearings, joints, or other mechanical components to reduce friction and wear.

M8 x 1 indicates a metric thread with a nominal diameter of 8 millimeters and a pitch of 1 millimeter between threads.

These nipples are designed to fit standard grease gun couplers. Ensure your grease gun is in good working order for proper connection.

Lubrication frequency depends on the component, operating conditions, and manufacturer recommendations. Consult your vehicle's service manual for specific intervals.

While designed for automotive use, they can be used on other machinery with compatible M8 x 1 threaded ports and similar lubrication requirements.

Buying in bulk is typically more cost-effective for workshops or mechanics who perform frequent maintenance or replacements, ensuring they have a readily available supply.

This is an international standard that specifies the dimensions and requirements for straight grease nipples, ensuring interchangeability and quality.

Verify the thread size is M8 x 1. Ensure the receiving port is clean and undamaged. Check for cross-threading.

Ensure the grease gun coupler is compatible with standard grease nipple fittings. Check for debris in the nipple's opening.

Check if the nipple is blocked with dirt or debris. Ensure the connected component is not seized or overfilled with grease. Verify the grease gun is functioning correctly.

Remove the nipple and inspect the threads on both the nipple and the port for damage. Reinstall with care, ensuring a secure fit without overtightening.