Best current price£86.21from The Range
Shopping.co.uk recommended and popular offers
The Range£86.21Visit shop Jcp Construction Products A4-316 Stainless Steel Sleeve Anchors Hexagon Nut - 10Mm/M8 X 75 (Box Of 50) - White
Visit shop10 offers from £86.21 - £125.24
View price history by clicking the chart icon.
The JCP Construction Products Sleeve Anchors are designed for professional contractors and serious DIY enthusiasts who require heavy-duty fixing solutions in concrete or masonry. Their primary benefit is providing high-strength, secure attachment points for structural components, though it is important to note that they require precise hole drilling to function effectively in their target materials.
| Colour | White |
|---|---|
| Model Part Number | A4-316 |
| Brand | JCP CONSTRUCTION PRODUCTS |
Sleeve anchors are primarily designed for solid concrete and masonry and are not recommended for hollow bricks where expansion cannot be achieved.
You will need a hammer drill, a masonry drill bit of the appropriate size, a hammer, and a socket wrench to tighten the hexagon nut.
Yes, removing dust and debris from the hole is essential for the expansion sleeve to grip the concrete properly.
The material properties make them durable, but always verify environmental exposure ratings based on your specific project requirements.
Sleeve anchors are generally considered permanent fixtures; removal typically involves cutting or grinding the fastener flush to the surface.
The drill hole is likely too large or the masonry is too soft; ensure the correct drill bit size is used and check the integrity of the substrate.
Verify that the drill hole is clear of masonry dust or that the hole depth is sufficient for the length of the anchor.
To install, select a drill bit that matches the specified diameter of the anchor. Drill the hole to the required depth, ensuring it is perpendicular to the surface. Use a blow-out pump or compressed air to clean the hole thoroughly. Insert the anchor through the fixture and into the hole, tapping it gently with a hammer if necessary until the nut and washer are flush against the material. Tighten the hexagon nut to the manufacturer's specified torque. Check periodically that nuts remain tight in high-vibration environments.
