Febi Wheel Bolt - M14x1.5 - 56mm - 12707
Best current price£10.87from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£10.87Visit shop Fits FEBI 12707 WHEEL BOLT
Visit shopeBay£10.87Visit shop All Offers
7 offers from £10.87 - £34.74
View price history by clicking the chart icon.
Wheel stud bolt Conical Seat F Male Hex 12707 FEBI BILSTEIN for PEUGEOT FIATFree delivery in 1–3 days£13.99Visit shop →
Original Febi Bilstein Wheel Bolt 12707 for Citroën Fiat Lancia Peugeot£25.78 delivery£14.54Visit shop →
Wheel stud bolt Conical Seat F External Hexagon 12707 FEBI BILSTEIN for PEUGEOTFree delivery in 1–3 days£16.90Visit shop →
4x WHEEL BOLT 12707 FOR PEUGEOT EXPERT/Platform/Chassis/Van 806 807 FIAT 1.8LFree delivery in 1–3 days£33.26Visit shop →
4x WHEEL BOLT 12707 FOR FIAT RHW /RHK /RHM 2.0L 4cyl SCUDO VanFree delivery in 1–3 days£34.74Visit shop →
4x WHEEL BOLT 12707 FOR FIAT RHW /RHK /RHM 2.0L 4cyl SCUDO VanFree delivery in 1–3 days£34.74Visit shop →
Product Information
Full details
The Febi Bilstein wheel bolt (12707) is designed for automotive technicians and DIY vehicle owners who require a reliable, high-strength replacement for OE hardware on Citroen, Peugeot, Fiat, and Lancia vehicles. Providing essential safety through its 10.9 grade steel construction and precise manufacturing, this bolt ensures a secure wheel fitment, though users must strictly verify compatibility against their vehicle's specific OE part numbers to avoid fitment errors.
All features
| Model Part Number | 12707 |
|---|---|
| Brand | febi bilstein |
Extended Product Information
FAQs
What is the tensile strength of this bolt?
This bolt is constructed from 10.9 grade steel, signifying high tensile strength suitable for critical automotive components.
Can I use this on a vehicle that uses ball-seat bolts?
No. This bolt has a conical taper seat. Using it on a ball-seat wheel can result in poor contact, loosening, and potential wheel damage.
What is the correct torque for these bolts?
Always refer to your specific vehicle owner's manual or service guide for the manufacturer-recommended torque settings.
Does this bolt fit all Citroen models?
No. Compatibility is limited to specific models requiring the M14 x 1.5 thread size. Please check your specific OE part number.
Is a torque wrench necessary for installation?
Yes. Using a torque wrench is highly recommended to ensure uniform clamping force and prevent bolt failure.
Troubleshooting
Bolt feels stiff while threading into the hub
Back the bolt out and inspect for debris in the hub threads; clean threads with a tap if necessary.
Bolt does not sit flush against the wheel rim
Verify that the wheel seat type matches the conical bolt design and ensure the bolt length is not excessive.
Signs of surface rust appearing
While zinc-coated, extreme road salt exposure can affect finish; clean periodically with non-abrasive cleaners.
Pros and Cons
Pros
- Meets or exceeds original equipment safety standards
- High-strength 10.9 grade steel construction
- Zinc-coated for improved rust and corrosion protection
- Compatible with a wide range of popular European models
Cons
- Specific compatibility requires cross-referencing with OE part numbers
- Only suitable for vehicles with a conical seat wheel design
- Requires proper torque specification which varies by vehicle
Setup, Compatibility & Care
Before installation, clean the vehicle's wheel hub threads with a wire brush to remove debris or corrosion. Ensure the wheel is flush against the hub before hand-tightening the bolts.
Compatibility Checklist:
- Verify your vehicle's OE part number against 5405.48 or 1476244080.
- Ensure the wheel design requires a conical seat (not ball or flat seat).
- Verify that a 56mm length bolt is the correct specification for your wheel offset.
Care Instructions:
- Do not use impact wrenches for the final torque sequence; always finish with a calibrated torque wrench.
- Periodically inspect bolts for signs of surface degradation or thread wear during tire rotations.