Best current price£6.18from Bradfords
Shopping.co.uk recommended and popular offers
Bradfords£6.18Visit shop Polypipe Compression Waste Straight Connector 32Mm Ps32 White
Visit shop1 offer from £6.18
View price history by clicking the chart icon.
The Polypipe Compression Waste Straight Connector (PS32) is designed for professional plumbers and DIY enthusiasts who need a reliable, glue-free solution for joining 32mm waste pipes. Its primary benefit is the rapid, leak-resistant compression jointing technology that eliminates the mess associated with solvent welding, though it requires careful alignment of the pipe ends to ensure a perfect watertight seal.
| Model Part Number | PS32 |
|---|---|
| Brand | Polypipe |
No, this is a compression fitting designed to be installed without the use of solvent cement or glue.
No, this specific model (PS32) is strictly for 32mm waste pipe systems.
While it is durable, it is best practice to ensure joints remain accessible for inspection in case of maintenance needs.
Generally, no. The built-in compression seal is designed to create a watertight connection on its own when correctly tightened.
Yes, unlike solvent-weld fittings, compression connectors can often be dismantled and reused, provided the seals and threads remain in good condition.
Ensure the pipe end is deburred and smooth; check that the internal sealing ring is correctly positioned and not pinched.
Ensure there is no debris on the threads; clean the threads and try hand-tightening again without using excessive force.
To install, ensure the 32mm waste pipe is cut squarely and the edges are deburred using a file or sandpaper to prevent damage to the internal O-ring. Slide the compression nut followed by the sealing cone onto the pipe end before inserting it into the connector housing. Hand-tighten the nut; do not over-tighten with pipe wrenches as this can crack the plastic threads. For maintenance, periodically inspect the joint for signs of dampness. If a leak occurs, check that the pipe is fully inserted and the seal is properly seated. Avoid using abrasive chemicals or excessive heat near the fitting.
