Best current price£5.76from UK Office Direct
Shopping.co.uk recommended and popular offers
UK Office Direct£5.76Visit shop Announce by 5 Star 25mm Snap Frame A5 with Mitred Corners White Frame
Visit shop3 offers from £5.76 - £8.19
View price history by clicking the chart icon.
The Announce 25mm Snap Frame is an ideal display solution for office managers, retail store owners, and home decorators looking to showcase signs or artwork with a clean, professional aesthetic. Its primary advantage is the user-friendly snap-open mechanism that allows you to swap graphics in seconds without removing the frame from the wall. While the white powder coat finish offers a sleek, modern appearance, potential users should note that it is designed primarily for indoor use and lacks the weather sealing required for outdoor exposure.
| Colour | White |
|---|---|
| Width | 14.8 |
| Height | 21 |
| Model Part Number | AA10583 |
| Brand | Announce |
Yes, the frame can be mounted in either orientation depending on your display requirements.
The frame is designed for standard paper stock and thin card; very thick media may prevent the frame edges from snapping shut completely.
No, this product is designed for indoor use only. The frame is not weather-sealed, and the PVC sheet may degrade under prolonged UV exposure.
You will need a drill with an appropriate masonry or wood bit, a screwdriver, and a pencil to mark your wall locations.
While replacement sheets are not sold separately by the brand, standard protective covers of the same thickness and A5 dimensions can be cut to fit as a substitute.
Apply firm, even pressure to the middle of the frame edge and pull outward; ensure no debris is obstructing the hinge channel.
Wipe the surface with a clean, slightly damp microfiber cloth to remove dust or accumulated static buildup.
Check that the styrene back panel is not warped and ensure your printed document is not thicker than the intended capacity; pull the document taut before snapping the edges shut.
To install, mark the wall using the pre-drilled holes on the back panel as a template. Drill pilot holes if necessary, insert the provided raw plugs, and secure the frame using the included screws. To maintain the unit, clean the white frame edges with a soft, dry cloth. When cleaning the front PVC sheet, use a microfiber cloth and avoid harsh chemicals or abrasive sponges, which could dull or scratch the anti-glare finish.
