Best current price£4.51from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£4.51Visit shop Tetrion Fillers Black Esb406 Easy Spray Satin 400Ml Esb406
Visit shop
Debenhams£9.96Visit shop Tetrion Unisex Black Easy Spray Satin 400Ml - Esb406
Visit shop
eBay£13.99Visit shop Tetrion Easy Spray Satin Black Paint 400mL Fast Drying Excellent Coverage
Visit shop13 offers from £4.51 - £47.99
View price history by clicking the chart icon.
Tetrion Easy Spray Satin Black is designed for DIY enthusiasts, hobbyists, and professionals seeking a reliable, high-quality finish for projects across the home, office, or workshop. Its primary benefit is providing excellent coverage with a fast-drying formula that simplifies quick surface transformations. However, users should note that optimal results depend heavily on surface preparation and proper application techniques to avoid drips or uneven textures.
| Colour | Black |
|---|---|
| Model Part Number | ESB406 |
| Brand | Tetrion Fillers |
You must shake the can vigorously for at least 2 minutes to ensure the contents are properly mixed.
Hold the can 20-30cm away from the surface you are painting.
Always invert the can and spray for a few seconds after you finish your project to clear any remaining paint from the nozzle.
It is designed as an all-purpose paint, but always ensure the surface is clean, dry, and compatible with spray paint before proceeding.
Use alternate horizontal and vertical strokes to ensure even coverage across the object.
Remove the nozzle and soak it in a suitable solvent or clear the aperture with a thin wire if dry paint is obstructing it.
You likely held the can too close or applied too much paint at once; sand the area smooth once dry and apply thinner, lighter coats.
Ensure the surface was thoroughly cleaned and degreased before application; consider a light sanding to provide 'tooth' for the paint to grip.
To ensure the best performance, shake the aerosol can vigorously for at least 2 minutes to mix the pigments thoroughly. Ensure the substrate is clean, dry, and free from contaminants such as oil or rust. For maintenance of the nozzle, always invert the can after use and press the actuator briefly until only air or propellant emerges; this clears the internal tube and prevents the nozzle from clogging with dry paint for future projects.
