Best current price£240.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£240.00Visit shop B&Q - Deep Panel Vancouver Clear Glazed Modern Light Brown White Oak Veneer Internal Oak & Particleboard Door(H)1981mm (W)838mm (T)35mm
Visit shop14 offers from £240.00 - £579.99
View price history by clicking the chart icon.
The LPD Vancouver Solid Core FD30 Internal Fire Door is designed for homeowners and contractors seeking a balance of modern aesthetic appeal and essential fire safety. Its primary benefit is the 30-minute fire resistance rating combined with a long-light glazed panel that enhances natural light flow between rooms. A key caveat to note is that because this is a heavy-duty solid core door with integrated fire glass, it requires careful handling during installation compared to standard hollow-core doors.
| Colour | Brown |
|---|---|
| Model Part Number | OVANLLFC27 |
| Brand | LPD Doors |
Yes, the Vancouver FD30 arrives with the long-light glazed panel factory-fitted.
The door is pre-finished. Painting over it may affect the fire rating and finish warranty; it is recommended to keep the factory finish.
FD30 denotes that the door has been tested to withstand fire for a minimum of 30 minutes, providing vital time for building evacuation.
Yes, but only within the manufacturer's allowed tolerances. Trimming too much will expose the core and void the fire safety certification.
Usually, intumescent seals are fitted to the frame or the door edge during installation. Always check with your installer to ensure the correct fire seals are used.
Check that the hinges are properly tightened and the frame is square. If it still sticks, lightly plane the affected edge, ensuring the fire seal remains intact.
Verify that a fire-rated door closer is correctly adjusted or that hinges are not obstructed. FD30 doors must close into the frame to maintain fire integrity.
Proper installation is vital for an FD30 door. Ensure the door frame is also fire-rated and that the gaps between the door and the frame are within the manufacturer's specified tolerance (typically 3mm). When trimming the door to fit, never remove excessive material from the edges, as this can compromise the fire-rated core. Use only fire-rated hinges and latches to remain compliant with safety regulations. For maintenance, simply wipe the pre-finished surface with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the factory-applied finish or scratch the glass panel.
