Best current price£31.10from eBay
Shopping.co.uk recommended and popular offers
eBay£31.10Visit shop Sealey Infrared Laser Digital Thermometer 8:1 Engine Diagnostic Thermometer
Visit shop
B&Q£41.84Visit shop B&Q - Vs900 Infrared Laser Digital Thermometer 12:1
Visit shop6 offers from £31.10 - £54.95
View price history by clicking the chart icon.
The Sealey Infrared Laser Digital Thermometer - VS900 is designed for professionals and DIY enthusiasts needing to measure surface temperatures from a distance. Its key benefit is providing instant, non-contact temperature readings with a helpful laser pointer for targeting. A potential caveat is its accuracy, which can be affected by environmental factors and emissivity settings not controllable on this model.
| Model Part Number | VS900 |
|---|---|
| Brand | Sealey |
The temperature range is -50°C to +380°C (-58°F to +716°F).
Press the '°C/°F' button to toggle between the two temperature units.
Battery life depends on usage, particularly how often the laser and backlight are active. The auto power-off feature helps conserve battery.
No, this is a surface temperature thermometer. It measures the infrared energy emitted from the surface and is not designed for immersion into liquids.
It means that at a distance of 12 inches, the thermometer measures a spot size of 1 inch in diameter. The further away you are, the larger the area being measured.
The accuracy is typically ±1.5% of the reading.
Yes, it is powered by a 9V battery which is supplied with the unit.
Check if the 9V battery is inserted correctly and has sufficient charge. Replace the battery if necessary.
Ensure the lens is clean and the target surface is within the optimal distance (based on the 12:1 focal ratio). Check that the thermometer is held steady. Note that readings may vary on surfaces with low emissivity.
Verify the 9V battery is properly installed and charged. The laser is typically active when the trigger is pulled.
The backlight may be on, but if readings are consistently poor, the 9V battery may be low and require replacement.
Setup:
Compatibility:
This device measures surface temperature through infrared emission and is compatible with any surface that emits thermal radiation. It is not designed for measuring internal temperatures of liquids or gases directly.
Care:
