Paulmann LED Tube - White
Best current price£8.15from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£8.15Visit shop Paulmann LED T8 Glass Tube 150cm 22W 141W 865 G13 Daylight 6500K Starter
Visit shopeBay£8.15Visit shop One Offer
1 offer from £8.15
View price history by clicking the chart icon.
eBayPaulmann LED T8 Glass Tube 150cm 22W 141W 865 G13 Daylight 6500K Starter
£13.06 delivery
£8.15
Visit shop
Product Information
Full details
The Paulmann 28998 LED Tube is designed for users looking to upgrade their existing fluorescent lighting with a more energy-efficient and longer-lasting solution. It offers bright, daylight-white illumination and is compatible with standard G13 fittings. A key benefit is its significantly reduced energy consumption and extended service life compared to traditional fluorescent lamps. However, its energy efficiency class is F, which may not be optimal for users prioritizing the highest energy savings.
All features
| Colour | White |
|---|---|
| Energy Efficiency | F |
| Model Part Number | 28998 |
| Brand | Paulmann |
Extended Product Information
FAQs
What is the colour temperature of this LED tube?
The colour temperature is 6500 Kelvin, which is classified as daylight white.
Do I need a new ballast to use this LED tube?
This tube is designed to work with conventional and low-loss electronic ballasts. You do not necessarily need a new ballast if your existing one is compatible, but direct mains connection is not supported.
How long will this LED tube last?
The bulb lifetime is rated at 15,000 hours, which is significantly longer than traditional fluorescent lamps.
Is this tube suitable for enclosed luminaires?
While the slim-line design helps, it's recommended to check the luminaire's ventilation specifications. Overheating can reduce the lifespan of any LED product.
What is the energy efficiency class of this bulb?
The energy efficiency class is F on the A to G scale.
What is the equivalent wattage of a traditional fluorescent tube?
This 22W LED tube is equivalent to a 141W fluorescent tube in terms of light output.
Can I use this tube without a ballast?
No, this LED tube is designed to operate with an electronic ballast (EM - Electronic Mains) and cannot be directly wired to the mains voltage.
Troubleshooting
Tube does not light up
Ensure the tube is correctly seated in the G13 sockets. Verify that the ballast is functional and compatible with LED tubes. Check the main power supply to the fixture.
Flickering light
This could indicate an issue with the ballast. Ensure the ballast is designed for LED tube compatibility or consider replacing it. Check for loose connections.
Tube lights up but is dim
Verify the tube is fully inserted. Check if the ballast is functioning optimally. Ensure the voltage supply is stable.
Pros and Cons
Pros
- Significantly longer lifespan than traditional fluorescent tubes.
- Consumes considerably less energy, leading to potential cost savings.
- Provides bright, daylight-like illumination ideal for tasks requiring attention.
- Easy installation due to standard G13 fitting and ballast compatibility.
- 'Eye friendly' certification suggests reduced eye strain.
- Durable construction with a high number of switch cycles.
Cons
- Rated Energy Efficiency Class F, which is not the highest possible rating.
- Initial cost may be higher than standard fluorescent tubes.
- Requires a compatible ballast for operation.
- Daylight white (6500K) might be too cool for some ambient lighting applications.
- Luminous flux of 2300lm may be insufficient for very large or specific high-light areas without multiple tubes.
Setup, Compatibility & Care
Setup:
- Ensure the power to the light fixture is switched off at the mains.
- Remove the old fluorescent tube by rotating it a quarter turn and gently pulling it out.
- Insert the Paulmann 28998 LED Tube into the G13 sockets, aligning the pins.
- Rotate the tube a quarter turn to secure it in place.
- Restore power and test the new LED tube.
Compatibility:
- Fitting Type: Standard G13 cap.
- Ballast Type: Compatible with conventional and low-loss electronic ballasts. Not designed for direct mains voltage connection (EM - electronic ballast required).
- Luminaire Type: Suitable for luminaires designed for T8 fluorescent tubes.
Care:
- Regularly dust the tube with a soft, dry cloth.
- For tougher marks, use a slightly damp cloth and ensure the tube is completely dry before powering on.
- Always switch off the power before cleaning.