Autotek Car Spray Paint - Citroen Poseidon Blue - 300ml

Achieve a professional finish with this Autotek car spray paint, specifically formulated as an exa...

Best current price£11.19from eBay

All Offers

4 offers from £11.19 - £12.99

View price history by clicking the chart icon.

eBayAutotek Citroen Poseidon Blue High Coverage Aerosol Spray Paint Fast Dry 300mL
Free delivery in 1–3 days
£11.19
Visit shop
My Motor WorldAutotek Blue Citroen Poseidon Spray Paint 300Ml
Free delivery in 1–3 days
£12.99
Visit shop

Product Information

Full details

Designed for automotive enthusiasts and DIY car owners, this 300ml Autotek spray paint provides a professional-grade color match for Citroen Poseidon Blue (Paint Code: KMH). It is an ideal solution for small-to-medium automotive touch-ups and surface repairs on metal, fiberglass, and rigid plastic. While it offers a durable and weather-resistant finish, users must ensure proper surface preparation and environmental conditions, as aerosol applications require careful ventilation and technique to prevent runs or uneven coating.

All features

ColourBlue
Model Part NumberMC243300
BrandAutotek
Container Volume300ml

Extended Product Information

FAQs

Does this paint require a clear coat?

While it provides a durable finish, applying an automotive-grade clear coat over the top is recommended for additional UV protection and depth of shine.

Can I use this on plastic bumpers?

Yes, this paint is suitable for rigid plastics, provided the surface is properly cleaned and primed first.

How long does it take to fully cure?

While touch-dry in minutes, we recommend allowing 24 hours for the paint to fully cure before washing or waxing the area.

Is this the exact match for all blue Citroens?

No, this is specifically matched to Citroen Poseidon Blue (Paint Code: KMH). Always verify your vehicle's paint code on the chassis plate.

How should I clean the nozzle after use?

Turn the can upside down and spray for a few seconds until clear gas comes out to prevent the paint from drying inside the nozzle.

Troubleshooting

Paint is running or sagging

The coats were applied too heavily or too close to the surface. Apply thinner, misted coats from a further distance.

Rough or grainy finish

The nozzle may be partially blocked or the spray distance was too far. Clean the nozzle tip or move slightly closer.

Poor adhesion to the surface

The surface was likely not cleaned correctly or the primer was not applied. Ensure the surface is degreased and primed.

Pros and Cons

Pros

  • Exact manufacturer color match for Citroen KMH
  • Fast-drying formula increases project efficiency
  • High versatility across different automotive surfaces
  • Professional-grade adhesion and weather protection

Cons

  • Requires specific primer for optimal surface bonding
  • Sensitivity to ambient temperature and humidity
  • Limited capacity (300ml) is not suitable for full-panel resprays

Setup, Compatibility & Care

Before beginning, ensure the vehicle surface is completely free of wax, grease, and debris using an appropriate degreaser. For the best possible adhesion, it is mandatory to apply Autotek Grey Primer to the prepared surface before applying the color coat.

Application Steps:

  1. Shake the aerosol can vigorously for at least 2 minutes to ensure proper pigment mixing.
  2. Hold the can 15-25cm from the target surface.
  3. Apply in thin, even coats.
  4. Wait 10-20 minutes between each application.
  5. Store in a cool, dry place away from direct sunlight to maintain the integrity of the propellant.

Compatibility is verified for Citroen models utilizing Paint Code KMH. Always perform a test spray on a piece of scrap material to verify the color match and nozzle performance before applying to the vehicle body.

Price History

DatePrice
Visit shop