SIP AirHub Wall Mounted Direct Drive Air Compressor 230V - 05323

Remove the air filter cover and take out the filter. Clean it by tapping it gently to remove dust and debris. If the filter is very dirty, replace it.

Drain the air tank after each use to remove any accumulated moisture, which can cause corrosion.

This is an oil-less compressor, so no oil is required.

The maximum working pressure is 8 bar.

It depends on the impact wrench's CFM requirements. Check that the impact wrench's air consumption is less than the compressor's 4.2 CFM FAD.

Please refer to the product documentation or contact the manufacturer for warranty information.

Contact the manufacturer or an authorized dealer for replacement parts.

Check the power supply and ensure the outlet is working. Check the power switch on the compressor and ensure it is in the 'on' position. Check the fuse and replace it if necessary.

Check for air leaks in the hose or connections. Tighten or replace any faulty fittings. Check the pressure switch and ensure it is functioning correctly.

Ensure the compressor is placed on a stable surface. Check for loose components and tighten them. If the noise persists, consult a qualified technician.

Check for air leaks in the system. The pressure switch may need to be adjusted or replaced. Consult a qualified technician if necessary.