Autotek Spray Paint - Vermillion Red - 300ml

This Autotek Vermillion Red spray paint is an exact match for Toyota Yaris models manufactured between 2011 and 2020, matching Manufacturer Paint Code: 3S1.

The paint is suitable for application on metal, glass fibre, and rigid plastic surfaces found on vehicles.

While not strictly mandatory for all uses, applying a minimum of two coats of Autotek Red Primer is highly recommended for optimal adhesion, colour depth, and longevity.

The formula is fast-drying, but specific drying times can vary depending on temperature, humidity, and application thickness. Allow adequate flash-off time between coats.

Yes, it is compatible with nearly all automotive paint finishes and is also suitable for cellulose finishes.

Hold the can upright and spray from a distance of approximately 25-30 cm (10-12 inches) for best results.

Thoroughly clean the area to remove dirt, rust, wax, and oil. Mask off surrounding areas to prevent overspray.

Shake the can vigorously for at least two minutes. Ensure the nozzle is not blocked. Try spraying in shorter, sweeping motions.

Ensure the surface was properly cleaned and degreased before application. Verify that primer was used and allowed to dry completely. Check that the paint was applied at the recommended distance and in thin coats.

Confirm that the paint code (3S1) matches your vehicle's paint code and that you have a compatible Toyota Yaris model year range. Ensure the original paint is not significantly faded.

Apply paint in thinner coats from the recommended distance. Avoid applying too much paint in one pass.