Integrated Door Hinge Pair - SPARES2GO - 3362

A screwdriver is typically required. Other tools might be needed based on the existing configuration. Always make sure to have all the tools needed before starting the installation.

This is a SPARES2GO compatible replacement part designed to fit Whirlpool models 3362 and 3363 5.0 41.

These hinges are compatible with Whirlpool models 3362 and 3363 5.0 41. Check your model number for verification.

The upper hinge typically attaches to the top of the door and the fridge frame, while the lower hinge attaches to the bottom.

Yes, the installation is designed to be straightforward for users with some mechanical aptitude. Follow the provided instructions carefully.

If you strip a screw, you may need a larger screw or a screw anchor. Ensure the hinge is securely attached.

Support the door while removing the hinges to prevent it from falling. Also, make sure to disconnect the water line if your fridge has an ice maker before removing the door.

Check that the hinges are properly aligned and securely fastened. Ensure no obstructions prevent the door from closing. Re-tighten screws if needed.

Verify the hinges are correctly installed. Adjust the hinge positions if necessary. Ensure the fridge is level.

Check for loose screws and tighten them. Lubricate the hinge if necessary, using a food-safe lubricant.

Replace the hinges with the new SPARES2GO Integrated Door Hinge Pair.