Labgear UHF 2-Way Signal Splitter - FJU402
Best current price£9.50from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£9.50Visit shop LABGEAR - UHF 2-Way Splitter Power Pass Both Ports 5-1000MHz
Visit shopeBay£9.50Visit shop All Offers
3 offers from £9.50 - £13.09
View price history by clicking the chart icon.
eBayLABGEAR - UHF 2-Way Splitter Power Pass Both Ports 5-1000MHz
Free delivery in 1–3 days
£9.50
Visit shop
LABGEAR FJU402 - UHF 2-Way Splitter Power Pass Both Ports 5-1000MHzFree delivery in 1–3 days£13.09Visit shop →
OnBuy.comLabgear - Uhf 2-Way Splitter Power Pass Both Ports 5-1000Mhz 5050171044872
Free delivery in 1–3 days
£11.70
Visit shop
Product Information
Full details
The Labgear UHF 2-Way Signal Splitter (FJU402) is designed for professional installers and homeowners seeking a reliable way to distribute digital satellite and terrestrial TV signals. Its primary benefit is the combination of high-quality signal integrity through superior shielding and versatile connectivity options, including power pass capabilities on both ports. While it offers excellent performance for standard distribution, users should note that it requires specific F-type cabling and proper grounding to ensure optimal signal stability.
All features
| Model Part Number | FJU402 |
|---|---|
| Brand | Labgear |
Extended Product Information
FAQs
Can I use this for cable internet?
This splitter is designed for digital satellite and terrestrial TV. Using it for high-frequency cable internet may result in signal instability.
Does this require a power supply?
No, the splitter is a passive device. It passes power from your connected satellite or terrestrial equipment through the cable to the device requiring power.
Is this waterproof?
No, the unit is intended for indoor use. It should be mounted in a dry location, such as a loft, cupboard, or protected enclosure.
Does it support 4K/UHD signals?
Yes, as long as the underlying signal distribution system is capable of handling the bandwidth, the splitter will pass the signal without degrading the quality.
Can I leave one output port disconnected?
While it will function, it is best practice to terminate unused ports with a 75ohm F-type resistor to maintain proper impedance.
Troubleshooting
Weak signal on one or both outputs
Check that all F-connectors are tightened securely and ensure the center copper conductor is not touching the outer shielding wire.
Intermittent signal dropouts
Inspect the coaxial cable runs for any sharp bends or physical damage; verify that the input signal strength at the source is sufficient.
Power pass not working for amplifier
Verify that your satellite receiver or distribution amplifier is configured to output power through the signal port.
Pros and Cons
Pros
- High-quality zinc die-cast housing reduces external signal interference
- Dual power pass functionality supports versatile installation setups
- Sturdy build quality with dedicated earth bond provision
- Standardized 75ohm F-type connectors ensure broad compatibility
Cons
- Requires F-type compression or screw-on connectors
- Not intended for non-satellite/terrestrial RF frequencies
- Requires professional grounding practice for safety compliance
Setup, Compatibility & Care
To install the FJU402, first identify a central location for the split, ideally as close to the source cable as possible to minimize total cable run length. Use the included screws to mount the unit to a flat, stable surface. Strip your coaxial cable to expose the center conductor and ensure the braiding is folded back securely before screwing on your F-connectors. Always ensure the earth bond terminal is connected to your property's main earth bonding if required by local electrical codes. To maintain the device, keep the area dry and periodically check that the F-connectors are tightened finger-tight to prevent oxidation or loose contact points.