Shopping.co.uk

Trend C145X1/4TC Sloting Router Cutter - 1/4"" Shank

Trend C145X1/4TC Sloting Router Cutter - 1/4"" Shank

This Trend Craft Pro 1/4in shank bearing guided slotting cutter has a 31.8mm diameter with Two Flu...

Best current price£34.18from Power Tools Direct

Best offers

Shopping.co.uk recommended and popular offers

All Offers

17 offers from £34.18 - £45.89

View price history by clicking the chart icon.

Power Tools DirectTrend Slotting 6.3Mm Cut Pk 1 C145x1/4Tc
£6.95 delivery
£34.18
Visit shop
OnBuy.comTrend C145x1/4Tc C145 X 1/4 Tct Bearing Guided Slotting Cutter 6.3Mm
Free delivery in 1–3 days
£37.23
Visit shop
B&QB&Q - C145X1/4Tc C145 X 1/4 Tct Bearing Guided Slotting Cutter 6.3mm Trec14514Tc
Free delivery in 1–3 days
£38.55
Visit shop
Blueperry agriculture (UK)Trend C145 Bearing Guided Slotting Cutter 1/4In Shank C145x1/4Tc
Free delivery in 1–3 days
£40.27
Visit shop
eBayTrend C145 x 1/4 TCT Bearing Guided Slotting Cutter 6.3mm
Free delivery in 1–3 days
£40.74
Visit shop

Product Information

Full details

This guide is for woodworkers and DIY enthusiasts looking to create precise slots and grooves in timber and timber-based materials. The Trend C145X1/4TC cutter offers a fast and accurate way to achieve this, ideal for fitting panels. However, users should be aware of the 1/4" shank size, ensuring compatibility with their router. This guide provides detailed information on setup, usage, and maintenance to help you get the most out of your cutter.

All features

Model Part NumberC145X1/4TC
BrandTrend

Extended Product Information

FAQs

What materials can I use this cutter on?

The Trend C145X1/4TC cutter is suitable for all timber and timber-based materials.

What is the shank size?

The shank size is 1/4".

How deep is the cut?

The depth of cut is 9.5 mm.

How do I clean the cutter?

Use a soft brush to remove wood chips and resin. Clean with a suitable solvent if necessary. Apply a light coat of oil to prevent rust.

Can I adjust the depth of the cut?

The depth of cut can be altered by swapping the bearing.

What does the PTFE coating do?

The PTFE coating minimizes heat and resin buildup, improving cutter performance and longevity.

Where can I find replacement parts?

Replacement bearings can be found online or from your local hardware store.

Troubleshooting

Cutter is not cutting cleanly.

Check the sharpness of the carbide tips. Ensure the feed rate is appropriate for the material. Clean the cutter to remove any resin buildup.

Cutter is vibrating excessively.

Make sure the cutter is securely installed in the collet. Reduce the cutting depth or feed rate.

Cutter is getting hot during use.

Reduce the feed rate, allow for cooling, and ensure the cutter is clean and free of resin buildup. Check the router's speed settings.

Pros and Cons

Pros

  • Creates clean and precise slots.
  • Durable carbide tips for long-lasting performance.
  • PTFE coating reduces friction and buildup.
  • Easy to control with a 1/4" shank.
  • Ideal for fitting panels and general woodworking tasks.

Cons

  • Requires a router with a 1/4" collet.
  • May require adjustments for different material thicknesses.
  • Depth of cut is fixed at 9.5 mm unless the bearing is swapped.

Setup, Compatibility & Care

  1. Router Compatibility: Ensure your router has a 1/4" collet to accommodate the shank size.
  2. Installation: Securely insert the cutter into the router collet, ensuring it's properly tightened.
  3. Material Preparation: Ensure the material is properly supported and secured before cutting.
  4. Cutting Depth: Set the cutting depth according to your needs. The standard depth of cut is 9.5 mm.
  5. Speed and Feed Rate: Use appropriate speed and feed rates for the material you are cutting. Consult your router's manual for recommended settings.
  6. Cleaning: After use, clean the cutter with a soft brush and remove any resin buildup. Apply a light coat of oil to prevent rust.

Price History

DatePrice
Visit shop